Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5266214. This is an improved remix building off the the Atomstack Z-Axis Screw for an A5 and a combination of other vario

Two Version , one with short nozzle (3) , One with long nozzle (4) ...to use with Atomstack Air assist pump or another air pump...the air is blown directly onto the engraving area, instead of from the

Two Version , one with short nozzle (3) , One with long nozzle (4) ...to use with Atomstack Air assist pump or another air pump...the air is blown directly onto the engraving area, instead of from the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4025175. I wanted to set up air assist on my K40 laser but after doing a but of research decided not to go with the nozzl

air assist and smoke extractor for neje 30 watt laser. i included an adapter i made for the cpap hose to my vacuum. vacuum. and has 40mm to 25mm connection. you will need to cut off the steel tub

#TidyDesk - This extremely elegant and multifunctional monitor stand 😜 not only creates better viewing angles for doing things like (learning fusion 360 with Product Design Online) 😏 and posting tha

Simple air assist for the x7 and other laser engravers with similar diodes. This includes the A5 pro+, M40 and M50 diodes. You will replace the glass with this air assist, it was the easiest and non d

The Driller's Assistant is a nifty little 2-in-1 drill guide and dust collector. Rather than breaking out the vacuum to clean up after drilling, just use this tool to collect the mess while you work,

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5185434. This model will replace the stock laser shield on the Comgrow Z1 laser. There is no loss in work space and It is

I created this air assist for my Sculpfun S6 Pro but it should fit the S9 laser. It replaces the stock acrylic cylinder and fixes in place with the set screw(s). I used a cheap aquarium air pump fro

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4943658. I designed an air assist for the Twotrees Totem S from scratch in Fusion360. It fits without any glue or scre

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5188767. This is designed for creating kyber crystal molds. Place the push pin into the cylinder hold. Apply tape to the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4942449. TwoTrees laser engraver air assist with a drinking straw and 4010 fan, runoff laser 12volts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4933099. This K40 air assist solution consists of 3 printed parts: (1) Nozzle (creates low volume airflow exiting the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4813009. I wanted to add an Air Assist to my Ortur Laser Master but didn't want to have to buy something expensive. I ha

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5206586. An air assist mount for my Endurance Laser to connect the Hose Loc-Line style air tube from which this project i

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4560632. Air assist nozzle for the Sainsmart Genmitsu LE5040 laser engraver. This part replaces the stock acrylic spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3786987. NEW Version2! We have a little whale cover for our bathtub spout to protect baby from hurting themselves if t

This is an assist that I created to make using the HardHeadVeterans Pop Out Rails work with the bump helmet. This will help if you are struggling popping in your ear pro.

These miniatures depict a highly detailed U.S. Army Ranger M1A1 Bazooka team from the World War II era. The set features two figures in dynamic, realistic poses: The Gunner: Positioned in a

This image showcases a highly detailed 3D-printable miniature set representing a two-man U.S. Army Ranger machine gun team during World War II. Description of the Miniatures **The Gunne

TwistAble is an assistive key turning aid designed for individuals affected by arthritis, paralysis, reduced hand function, and similar conditions. This tool helps users turn keys more easily by incre

A unique 3D printable creation — this Daily Living Assistance Tools. Bundle of 6 complete 3D printable model packages. Save $14.95 (50% OFF) compared to buying individually! Models Included

Tending to your indoor plants is no simple task. It is a balancing act between watering schedules, adequate time in the sunlight, aesthetic pots to showcase your cherished leafy friends, and much much

Tending to your indoor plants is no simple task. It is a balancing act between watering schedules, adequate time in the sunlight, aesthetic pots to showcase your cherished leafy friends, and much much

Tending to your indoor plants is no simple task. It is a balancing act between watering schedules, adequate time in the sunlight, aesthetic pots to showcase your cherished leafy friends, and much much

This is a super helpful PTFE tube cutter assistant I made. Using it will help you get a perfectly straight edge. A standard utility knife should fit in the groove to cut the tube. Hope you like it! Do

I designed these to allow me to mount my Home Assistant Green on the side wall of the shelf the router sits on. I printed two of the brackets, removed the bolts holding the heat-sink on, and replaced

I found that the Solder Assist kits, such as those made by DURATOOL, goot, MEEC Tools, and [RND

SquiggleAide is an assistive writing and drawing aid designed for individuals affected by arthritis, paralysis, reduced motor function, etc. This tool helps users write or draw comfortably while requi

Title says it all. I designed this to mount the air assist under the table that houses my laser engraver enclosure. You can mount it up right or upside down. You will need two-sided tape, a 4.8x15mm

Im selling these on my Etsy shop incase you don't feel like making these yourself [https://www.etsy.com/listing/1765102267/home-assistant-fridge-magnet?click_key=49c13022f8f8a4a2b50336ddfd3abdcfd67cd

I designed this simple lock mechanism so I can quickly disconnect the air hose from my Creality air assist pump to use with more than one device, and it makes it easier to route the tubing if you have

About This Product Discover the ultimate dental assistant stamp tile set, designed specifically for crafting perfectionists. With five motif sizes ranging from 20 to 40 mm, this collection is ideal f

Spring is here! Its time to build some soil sensors for the garden. The HydroGuardian 3D models consist of a streamlined sensor housing and a user-friendly, snap-together electronics enclosure. The

Case for raspberry pi 4 or 5, Sonoff zigbee dongle P (model E can also fit but loosely) and 5v UPS Hardware needed: raspberry pi 4 or 5 (heatsink is recommended) Sonoff zigbee dongle P 5v UPS (

A few days before (posting the files) on instagram saw something like this (clip in build and use video) https://youtu.be/2Wq_UWXgL0c someone made a one handed nail clipper attachment thing. Needing t

Hey there, Thingiverse won't let me upload another version of my former design... So I decided to upload it here on Thangs. I have opened the hole for the red cross laser and narrowed the air holes.

Attaches to the laser cutting head and enables air to be blown down along the cutting path. Keeping smoke off of the optics and helping to blow out flames.

I quickly made an air adapter for my cheap laser engraver. This replaces the orange laser shield and allows you to hook up a cheap air pump to reduce burn marks and make cutting easier. Depending on

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5252577. This is the design of Alex van Maarschalkerwaart in the FB Group "Atomstack X7 Pro Users Group" This nozzle r

#PDOhomedevice

Use an airline from oxygen mask to fit the connector size of .208" (5.43mm). You will need to slice the model so the laminations add strength and help make a good shape for the O-ring. An O-ring abo

TidyDesk

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4746553. This is a remix of https://www.thingiverse.com/thing:4692711 I made this because the air nozzle was too high

IMPORTANT: This particular design is sized to fit a compact pistol (Specifically, the Ruger EC9s). If you have a full sized pistol you may need to scale the design up slightly.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4105026. #Make bed level correction easier and quicker! ##Optimized for Original Prusa printers. ##(Mostl

#PDOhomedevice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3882799. this is a ear plug holder that slides onto the side of a 3/4 in thick table. it has lil plunger type parts that

This is for people who have trouble pressing the buttons on the toilet to flush it.