suction cup accessible sponge holder 

spong holder sucks-Body.stl

bachman pancake drive gears

bachmann 30l8-Body.stl

vintage shimano 3 speed hub shift lever parts

3spd shift keeper-v2.stl

Palestine flag belt buckle

palestine buckle-Body.stl

F U C K ICE belt buckle

R hand intercourse ICE buckle.stl

Minnesota flag belt buckle

Minnesota flag belt buckle.stl

Occlupanid domesticus

pet Occlupanid-Body.stl

scalable ergonomic broom handle 125%

scailable ergo handle125-push.stl

scalable ergonomic broom handle 150%

scailable ergo handle150-push.stl

scalable ergonomic broom handle

scailable ergo handle-push.stl

Threshing Stone

threshing stone-stone.stl

Addaptive sink over flow sponge holder

This device holds a sponge stationary in the overflow hole (22mm round) of our sink so I a one armed person can wash my grubbys (hands alternate). Looks like it will work well with initial tests, true test will come when i get greasy gross after working in the shop. as always all adaptive files are free I just ask you don't profit from my work. I have added the freecad file so you can modify as needed to fit your sink.

one handed assistive nail clipper

Assistive nail clipper-base

one handed zipper helper

i find zippers vary difficult with one hand. kept observing that i would use my fingers to push the bottom of the coat down and pull the zip up with index and thumb. a better grip for fingers to push on would be helpful so after some thinking and fiddling a wedge shaped "button" was found to be helpful. i need to put a second wedge on the other side of the zipper to increase grip.

Droid Leg Lamp

r2d2 shade lite.stl

peliKan filler nut

Got my grubbys on a west German Pelican M150 fountain pen. But it was Busted the plastic Nut thing that draws the plunger/ ink into the pen was nonfunctional. Some CAD, Printer cleaning of crusty ink time later it works again. I Think this will fit many pelican pens. The walls on this are <1mm so highly recommend (as i did) print in SLA VS FDM.

pelican filler nut

Sights for laser bosch measuring tool

lazer sight-body.stl

Sharpie Holder (clip)

I needed a way to hold my sharpies i use to keep track of how many times I used my masks. This is what I came up with. Used double sided tape to stick it to my dash. Found it a great place to hang my mask to. 
If putting in a car print in material that can withstand the heat. 100% scale is snug on caps 90% should be snug on body (have not tested scaling).

Wearable Disability Pride Flag

Disability Pride flag -flag

Adaptive med bottle helper

med cap helper

under shelf prescription lid helper

This is a under side of shelf improvement of the previous cap removing assistive device for prescription bottles. This fits the human proof lids from Dillons (Kroger) and CVS lids and probably more. Works with both large and small cap sizes. counter sunk holes for use with sheet-rock screws (or whatever). I have found it is much easier for my needs with one damaged arm (I have one arm and its worn out).

The Guide case for Galaxy S10e

Don't Panic phone case.stl

incubator temp knob

The temperature control knob on my incubator was just a ~6mm stick and was hard to control. this design just presses onto the ~6mm shaft using a tapered internal fit. Is now much easier to adjust temperature accurately.

incubator knob-Body.stl

DE blade holder

Got myself a Double edged razor sample pack and wanted something to keep the blades organised during the many test shaves to come. Printed in silk and the stringing caused some of the slots to not let the blade all the way down. 

incubator thermometer holder

Our tiny dinosaur egg incubator was running way to dry. A quick trip to tinkercad (because it had a premade egg model) resulted in this wonderful object that, once stuffed with a paper towel and dipped in water helps keep humidity up much better then the water pans. They are used in a incubator that has an automatic turner hence the egg shape. the other file is to hold the thermometer up higher.

incubator thermometer holder.stl

incubator humidity egg

Bit driver with rule and storage

Needed a EDC bit driver with storage for a few bits. added a rule to. has both in line and right angle drives. recommend printing in PETG but to each their own.

one handed rc plane controller body.

One handed RC plane controller, 3 channel so bank and yank it. used trigger from rc car and joy stick from game controller for my pots.
See video https://www.youtube.com/watch?v=IzirbA9b5tA&list=PLgHffVEnhL472eZ0K1Vmh6IfRmdCtLZmq&index=3&t=10s


rc plane 3c mk2.stl

Ukraine Support buckle.stl

I have no idea how to best help Ukraine in the fight for there sovereignty. Right now i can wear my support for the world to see.
This is designed for the indents to be filled with paint or resin. I will be painting in blue and yellow in support of Ukraine. 

Accessable Medicine bottle opener.

medisen bottle opener-cap.stl

sharps lid mason-Body.stl

Mason jar lid with slot for used razors and razor stand.

wallet v5.stl

loosely based on ridge like wallets but designed to be used with one hand (because I only have one). Have been using continuously for about 2 years. have 7 cards in it now and usually some cash under the hair tie (works fine without the hair tie). Print on the end without the finger cutout on build plate.
What do you think of my pirate makers mark.

Calvin and Hobbs MERTL RAY

Ray gun attachment for the rubber band gun body

RBG adaptible triger_MERTILIZER v1.stl

RIGHT TO REPAIR buckle L v1.stl

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment to belt through holes opposite hook. print with high wall count and infill.

blank buckle R v1.stl

RIGHT TO REPAIR buckle R v1.stl

blank buckle R v2.step

blank buckle L v1.stl

Tool Handle

print with high wall count and infill, Recommend PETG or Composite filament. 

Right to repair tool handal body v1.stl

Family person, disabled, farmer, maker, bs civil ENGT.

Been making my world accessible for 30+ years one problem at a time.

PlainsPirate

Achievements

Seedling

Voyager

Up and Coming