tracking pixel
Tim

Home Assistant Green Mounting Bracket

by
timothy.s.dev
Follow
Follow
Remix Model
timothy.s.dev
timothy.s.dev
|
Image 1 of 2
Home Assistant Green Mounting Bracket 3d model
timothy.s.dev
timothy.s.dev
|
Image 1 of 2
Home Assistant Green Mounting Bracket 3d model
2D
3D
Makes
Home Assistant Green Mounting Bracket 3d model
Home Assistant Green Mounting Bracket 3d model

I designed these to allow me to mount my Home Assistant Green on the side wall of the shelf the router sits on. I printed two of the brackets, removed the bolts holding the heat-sink on, and replaced them with slightly longer (M3*20mm) bolts. Then I used wood screws (#4, 1/2") to attach them to pre-drilled holes on the shelf wall.

Parts Required:

  • 4x M3*20mm bolts
  • 4x #4 wood screws

1 Likes8 DownloadsJanuary 18, 2024



1 Likes8 DownloadsJanuary 18, 2024