A wall mounted set inspired by the famous “Amanita Muscaria”.

Mushroom A: Hook and clothes hanger Mushroom B: Shelf, magnetic key holder and clothes hanger Mushroom C: Shelf and clothes hanger

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

Instructions

• Print all parts
• Insert and attach magnets into the pockets of Mushroom B. I used 20x2 mm N45 neodymium magnets but other sizes work, too. Make sure they are strong enough to hold your key. You can use double sided tape or glue to fix them in place
• Optional: Insert the little rod connectors as positioning helpers
• Glue both sides of all mushrooms together
• Screw or glue the holder onto your wall. Screw and dowels are the most reliable fixation. The diameter of the hole is 5.5 mm
• Attach the mushrooms onto the holders
• Enjoy!

Print settings Required build volume: 130 x 130 x 100 mm Material usage for a full set in multi color: 310 g

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Build plate adhesion type: none

Mushrooms Infill: 15% Outer walls: 2 Top / Bottom layers: 4

Holders Infill: 50% Outer walls: 5 Top / Bottom layers: 6