This model was made in collaboration with Forgecore. Go check out all his other fidget designs!

A set of magnetic mushroom fidgets to keep your fingers busy. The Mushroom caps and stems each have a magnet inside. This allows you to fidget with the caps in satisfying ways. The Penny Bun is a pot cap fidget, the morel mushroom is a joystick fidget, and the shiitake is a slider fidget.

Versions included

• A: For 10 x 2 mm magnets
• B: For 3/8’’ x 1/2’’ magnets – this version also magnetizes on the bottom, which allows you to store them on anything metal – also comes with 3MF multi color files

Instructions

• Get the right neodymium magnets, preferably in N45 or N52 strength
• Print the head, stem and two magnet covers for each mushroom
• Glue in the magnets – be careful with the orientation so they actually magnetize together!
• Glue in the covers

Print settings Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,08 mm Infill: 15% Build plate adhesion type: a brim for the morel head is advised, none for all other parts