🎄Christmas Tree Lamp🎄

Bring the magic of the season into your home with our Christmas Tree Lamp.

**Christmas Tree Ornament:**
Layer Height: 0.12 mm
Supports: No
Filling: 15%
Bream: Recommended

**Christmas Tree Star:**
Layer Height: 0.2 mm
Supports: No
Filling: 15%
Bream: Recommended

**Christmas Tree/Base:**
Layer Height: 0.2 mm
Supports: No
Filling: 15%

_**NOTE:**_ Designed to work with Bambu LED Lamp Kit

**You are not authorized to use our pictures**

Christmas Tree Lamp

Chritmas Tree Lamp (Tree).stl

Introducing Halo, a modern table lamp that embodies simplicity and elegance through its radiant, circular glow. Designed to create a warm and inviting atmosphere, Halo casts a gentle ring of light that enhances any space with a touch of serenity and style.

**Supports**
No supports needed.

**Scaling**
I wouldn't recommend scaling this model as it is designed to support an E26/26LED Bulbs. I am using a standard E14 light cord: https://www.amazon.co.uk/dp/B0CM5P9MKF

**Model Dimensions**
Height: 24 cm / 9.45 inches
Length: 13 cm / 5.12 inches
Width: 13 cm / 5.12 inches

**3D Printing Settings**

_Lamp Base_
Layer Height: 0.2 mm
Infill: 15%

_Lamp Top_
Layer Height: 0.2 mm
Infill: 15%

_Lamp Plain Parts_
Layer Height: 0.2 mm
Infill: 15%

**Filament Used**
Bambu Black Matte PLA
KINGROON White PLA

**You are not authorized to use our pictures**

Small Table/Bedside Lamp - Halo 

Halo (Top).stl

Introducing Hydra, a modern lamp designed to bring a sense of tranquility to your space.  Inspired by the flow of water, Hydra combines sleek design with ambient lighting, creating a harmonious blend of style and relaxation in any room.

**Supports**
No supports needed.

**Scaling**
I wouldn't recommend scaling this model as it is designed to support an E26/26LED Bulbs. I am using a standard E26/27 light cord: https://www.amazon.co.uk/dp/B0CM5P9MKF

**Model Dimensions**
Height: 27 cm / 10.6 inches
Length: 21 cm / 8.27 inches
Width: 9 cm / 3.54 inches

**3D Printing Settings**

**Lamp Base**
Layer Height: 0.2 mm
Infill: 15%

**Lamp Top**
Layer Height: 0.2 mm
Infill: 15%

**Filament Used**
Bambu Black Matte PLA
KINGROON White PLA

**You are not authorized to use our pictures**

Small Table/Bedside Lamp - Hydra

Hydra (Lamp Shade).stl

Galene from the Ancient Greek word, Γαλήνη which means 'calm weather' or 'calm, tranquility'.

Introducing Galene, a modern table lamp designed to bring a sense of calm and refined style to any room. With its sleek lines and soothing glow, Galene creates a peaceful atmosphere, perfect for unwinding and relaxing after a long day.

**Supports**
yes for the lamp shade.  

**Scaling**
I wouldn't recommend scaling this model as it is designed to support an E26/26LED Bulbs. I am using a standard E26/27 light cord: https://www.amazon.co.uk/dp/B0CM5P9MKF

**Model Dimensions**
Height: 25 cm / 9.84 inches
Length: 13 cm / 5.2 inches
Width: 10 cm / 3.93 inches

**3D Printing Settings**

_Lamp Base_
Layer Height: 0.2 mm
Infill: 15%

_Lamp Top_
Layer Height: 0.2 mm
Infill: 15%

**Filament Used**
Bambu Latte Brown Matte PLA
KINGROON White PLA

**You are not authorized to use our pictures**

Small Table/Bedside Lamp - Galene

Galene (Base).stl

Named after the Latin word for “golden”, Aureo table lamp makes a perfect blend of contemporary style and timeless elegance.

**Supports**
Supports needed for the lamp shade.

**Scaling**
I wouldn't recommend scaling this model as it is designed to support an E14 LED Bulbs.

**Model Dimensions**
Height: 22 cm / 8.66 inches
Length: 22 cm / 8.66 inches
Width: 8 cm / 3.15 inches

**3D Printing Settings**

_Lamp Base_
Layer Height: 0.2 mm
Infill: 15%

_Lamp Top_
Layer Height: 0.2 mm
Infill: 15%

**Filament Used**
Bambu Black Matte PLA
KINGROON White PLA

**You are not authorized to use our pictures**

Small Table/Bedside Lamp -Aureo 

Aureo (Base).stl

Hello, thank you for stopping by! I am Dennis, owner of elden.desings, a 3D printing enthusiast and product designer who loves to share his passion with you all.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

This model is our take on the iconic relic of the Silver Hand, Ashbringer.

This model is no joke. Coming in at nearly 4' in length, this is best used as a display piece but is designed with several channels for support rods. Combined with low infill and decent wall counts, it could be something that's wieldable.

The design accounts for the below support rods:
2x 200mm x 1/2" Diameter
2x 85mm x 1/2" Diameter (Medallion support rods)
1x 500mm x 1/2" Diameter
1x 250mm x 1/2" Diameter

Happy 30 years to Warcraft with many more to come!

Ashbringer - Warcraft

Silver Hand Medallion.stl

This model is our take on the famous Ghostbusters ghost trap from the iconic 1984 movie.
This is a complex print involving 38 pieces all smartly split for simple printing on a medium to large sized printer.
Featuring doors using a 1/8"x190mm rod to allow for opening and closing, an open compartment under the front panel to add a small smoke machine with a pressure fit top, and wheels that can actually roll (using a 1/8" pin as well), this design is a Ghostbusters nerd's dream.

Ghost Trap - Ghostbusters 1984

Side Detail Knob.stl

This model is our take on a Warhammer 40,000 data slate which we have converted to fit a cellphone.
This is currently designed and tested for an iPhone 15 Pro Max but further phone sizes can be added upon request!
The top part for the phone is connected with four 6x3mm magnets but any scaling will affect the size of the predesigned holes.
The number pad has been separated for resin printing but otherwise the numbers may not print on FDM as the modelled numbers are quite small.

Data Slate Phone Case - Warhammer 40k

Number Pad.stl

This model is our take on the classic Battlestar Galactica Cylon Centurion!

As the series released back in the 70's, there was a significant amount of inconsistencies across all of the Cylon's that appeared in the show. This version is all modelled off the same specific helmet across multiple angles.

This is a decently sized helmet, scaled around a 24" diameter head and is presplit into 7 parts for easier printing.

Cylon Centurion Helmet - Battlestar Galactica (1978)

Front_Top_Right.stl

This model is our take on Cad Bane's iconic blasters as seen in The Clone Wars.

This version is split up into 17 pieces for a very high quality print through resin or FDM means.


Cad Bane LL-30 Blaster - Clone Wars

Hand Grip.stl

Come On Down! You're the next contestant on The Price is Right. After the Showcase showdown, is time to bid on the Showcase Prizes! This 1/6 scale reproduction of the 80's and 90's era Showcase podiums are perfect for your miniature game show dioramas. This multi-part kit model is multi-color and meant to be printed on an AMS system.

Includes the Podium Parts: Base, Stem, Main, and Top. These each print separately and assemble using glue for stronger connection.

Also included are removeable Prizes Tags and Prices Tags that snap in place. You can customize the prices by painting the light up dots in a slicer such as Bambu Studio.

As a bonus you also receive Bob Barker's famous Superscope microphone handheld wand and podium mounted mics. These use a 60mm section of straightened 1.75mm filament (preferably something strong like a PLA+)

Detailed instructions to come.

Creative Commons Licenses 4.0 BY-NC-ND - Attribution, Non-Commercial, No Derivatives. A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.

Showcase Podium - The Price is Right

TPIR_Podium_Main.3mf

4th Dr. Who HueForge 1967 Retro TV Screen for the matching TV Magnet [https://than.gs/m/1127237](https://than.gs/m/1127237). 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA Black 
	PLA Burnt Titanium
	PLA Royal Blue
	PLA Pink
	PLA Cream
	PLA White
Swap Instructions:
	Start with Black
	At layer #5 (0.48mm) swap to Burnt Titanium
	At layer #7 (0.64mm) swap to Royal Blue
	At layer #9 (0.8mm) swap to Pink
	At layer #12 (1.04mm) swap to Cream
	At layer #15 (1.28mm) swap to White for the rest.

Creative Commons Licenses 4.0 BY-NC-ND - Attribution, Non-Commercial, No Derivatives. A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.

4th Dr. Who HueForge 1967 Retro TV Screen

4thDrWho__90x67.3mf

New version of the RetroMaker 1967 TV [https://than.gs/m/639400](https://than.gs/m/639400), prints flat and has holes to insert 6mm diameter by 2mm thick rare earth magnets. [https://www.amazon.com/dp/B096LYVGPS](https://www.amazon.com/dp/B096LYVGPS) This is meant to be a refrigerator magnet or attach to any flat metal surface. The center screen area is an empty area for HueForge prints that are 89.7mm x 68.6mm (Dr. Who insert shown in picture).

Prints flat with supports in the screen area only - 3MF File has included supports.
Pause at layer 12 (0.2mm layer height) to insert the magnets, be VERY CAREFUL pushing them in, support the buildplate underneath if possible to not deflect the surface of the plate. Make sure they are flush with the paused surface as to not impede the nozzle movements.

Use the .3MF for full 4-color painted print.

Creative Commons Licenses 4.0 BY-NC-ND - Attribution, Non-Commercial, No Derivitives. A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.




1967 Retro TV Magnet

67TVMagnet.stl

Go back in time with this 1938 radio case for a bluetooth speaker. With this small, nostalgic retro version of a classic radio you can enjoy listening to old radios shows, music from then or really any era. Can also be used without the speaker for a decorative stash box to hold fun items. The knobs even twist for fidgeting fun.

This version in sized for an Altec-Lansing Mini H2O bluetooth speaker which you can get [here](https://www.amazon.com/dp/B013XJLCGU) on Amazon.

The box and lid print seperately and are both 2 color, AMS or color swapped prints (which won't exactly match the pictures, the box will have more strips). Both knobs are printed separately (no supports) and snap in place to the lid. I would recommend NOT using silk pla for the knobs as they tend to snap and break.

**Print Instructions:**
- Box prints without supports, make sure you have good plate adhesion for the corners of this box. Use the .3MF AMS file or manually color swap the stripes layers:
10.0mm-13.0mm
16.4mm-19.4mm
22.8mm-25.8mm

- Lid requires normal supports and a color swap for the speaker grill between layers 4.2mm-4.8mm. 20% Infill Recommended. ***Supports and support interface can be difficult to remove. Be gentle snipping the support interface from the grill to not damage it.*** Make sure to fully remove supports around the edge so the lid will fit on the box, it is a snug fit which will loosen up over time.

- Knob1 requires an AMS system to get the logo flush on the dial. No supports. 3 walls 30% infill.
- Knob1thick is a version to print if your filament shrinks the peg and is too loose. 3 walls 30% infill.
- Knob1swap is designed to swap colors between layers 0.6mm -1.0mm.3 walls 30% infill.
- Knob2 is one color, no supports. 3 walls 30% infill.
- Knob2thick is a version to print if your filament shrinks the peg and is too loose. 3 walls 30% infill.

Creative Commons Licenses 4.0 BY-NC-ND - Attribution, Non-Commercial, No Derivitives. A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.



1938 Radio Bluetooth Speaker Case

1938_Radio.3mf

1938_Radio.stl

It's Foot Bowl! now with a tail opening to use when crocheting with yarn. This functional yarn bowl has a cute curly "tail" to string your yarn through to keep that ball in place. Smooth on the inside, stone texture on the outside.

Print Instructions:
10% Gyroid infill (increase if you want a heavier bowl)
Tree supports on build plate only with a 25° overhang threshold.

Creative Commons License 4.0 BY-NC-ND
A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.

Yarn Foot Bowl

footbowl_yarn.stl

Designer and maker of 3D models, Retro Pop Culture Art & Objects,  Home Décor and Scale Model Train Miniatures.


https://www.youtube.com/watch?v=jj3vnPYccS4

Simple and clean looking Xbox Controller Stand
fits 8x3mm anti slip rubber pads (optional)

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial



Minimalistic Xbox Controller Stand

stand.stl

I've designed a minimalistic Xbox Controller Stand for the IKEA SKÅDIS pegboard

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

Xbox Controller Stand for IKEA SKÅDIS Pegboard

stand_pegboard.stl

assembly video:
https://www.youtube.com/shorts/5AGQLIMmsDk

1:64 Print-in-place kit card.
Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version

The Jeep Kit Card:
https://than.gs/m/1051403
The Trailer:
https://than.gs/m/1051404
The Gun:
https://than.gs/m/1064529

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

Printsettings:
No support
No raft
0,16mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

37mm Gun M3 for the Jeep Kit Card

jeep_gun_kit_card.stl

assembly video:
https://www.youtube.com/shorts/6n7tGLCy-1o

1:64 Print-in-place kit card.
Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version

The Jeep Kit Card:
https://than.gs/m/1051403
The Trailer:
https://than.gs/m/1051404
The Gun:
https://than.gs/m/1064529

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

Printsettings:
No support
No raft
0,16mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Trailer for the Jeep Kit Card

jeep_trailer_kit_card.stl

Projectvideo:
https://www.youtube.com/watch?v=6RgBXBwwXBg

1:64 Print-in-place kit card.
Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version

The Jeep Kit Card:
https://than.gs/m/1051403
The Trailer:
https://than.gs/m/1051404
The Gun:
https://than.gs/m/1064529

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

Printsettings:
No support
No raft
0,16mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Jeep Kit Card

jeep_kit_card.stl

Instagram:
https://www.instagram.com/agepbiz/

YouTube:
https://www.youtube.com/user/agepbiz

Twitter:
https://twitter.com/agepbiz

Most wins

elden.designs