Explore the innovative, funny, and topical Trump Voodoo Doll and Toothpick Holder 3D model on thangs.com, designed with striking detail under the 'Art/Sculptures & Statues' category. This brilliant 3D model, intricately presented by designer thelightspd, effectively captures the zeitgeist of modern political discourse. 

The model is a two-part creation, consisting of a voodoo doll with printed pins and a version of the same body designed to contain toothpicks—perfect for a night of political satire at Thanksgiving dinner with family. With just five colors, you can bring this model to life and highlight features such as a red tie for additional detail. 

Thelightspd assures that although he has designed multiple Trump-inspired models (like Shoes, Bear, and Dumpster), this creation should not be misconstrued as political endorsement. This engaging model stands rather, as a statement of belief in community, family, and country amidst political differences. 

This model reflects not only the designer's tremendous artistic caliber but also the spirit of thangs.com, a platform that fosters creativity, community respect, innovation, and originality. Thelightspd even encourages selling the model widely, fostering an entrepreneurial spirit within the 3D art community. 

Start printing this exceptional 3D model today to bring a touch of humor and topical discussion to your family gatherings.

Trump VooDoo Doll, Toothpick Holder, Political, Funny

Trump Voodoo Generic.3mf

Discover an intricately designed 3D model - the Christmas Choo Choo Advent Calendar, available on Thangs.com. This detailed representation of a traditional Christmas train is much more than just a toy. With 5-pieces in its stationary structure, it serves as a perfect seasonal decoration that embodies the holiday spirit. Although it doesn't include a track, the wheels are thoughtfully designed to be separate for less filament wastage and can be effortlessly snapped into place. Bear in mind, this masterpiece requires a good amount of filament. The model, categorized under Seasonal/Christmas, does not only push the boundaries of 3D printing but also serves as an asset for designers who want to learn, adapt, and create something unique. The creator encourages feedback and suggestions to further enhance or expand the design. So explore, visualize, and print this Christmas Choo Choo Advent Calendar 3D model to

Christmas Choo Choo Advent Calendar

ADVENT TRAIN FULL GENERIC.3mf

Unveil the holiday spirit with our 3D model of a Simple Advent Calendar available at Thangs.com. Designed with unparalleled attention to detail, this 3D model splendidly embodies the joyous essence of a classic Christmas Advent Calendar. It features 25 easy-to-slide drawers, enhancing the element of surprise as you pull out a different drawer each day. Enhancing its functionality, the model includes finger holes at the back to ensure effortless drawer removal. We've upgraded our design for the Advent tree, exclusively crafted to fit seamlessly on the Bambu Lab X1C, P1P, and A1 platforms. The model joins the star and the base with a sturdy glue application, securing its durable structure. Whether you're immersing yourself in the seasonal spirit, or simply decorating your space, this 3D model of an Advent Calendar brings it all. For a detailed visual representation, please refer to the given links for images of the 3D model.

Simple Advent Calendar, 25 day, Christmas, Merry Christmas

SIMPLE ADVENT BAMBU.3mf

This is a dice tower, that is as good as a dice tower as it is as a center piece for your christmas table. But this was built for the chrsitmas tree DND nights. It's a large print, but I made this thin to print fast. I think you will be surprised how fast this prints. 

Christmas Tree, Dice Tower, DND, Game, Tabletop Games

Christmas Tree Dice Tower.3mf

Boost your 3D model collection with our distinctive Skull and Crossbones Care Bear from thangs.com. This unique 3D model falls under the "Articulated" category, featuring a flexible, print-in-place design for your convenience. The Care Bear model showcases a skull and crossbones design, with a slightly sour expression, lending it a characteristically silent yet strong appeal. You can easily print this 3D model in four colors or less using any MMU printer,ing for a hassle-free printing experience. From its flexibility to its intricate design, this 3D model offers a blend of creativity and functionality that can enhance your 3D creations. Discover more about our Skull and Crossbones Care Bear on thangs.com and enjoy a seamless 3D modelling experience.

Skull and Crossbones Care Bear, Sour Face, Flexi, Flexible

Skull and Cross Bones Bear.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

The legendary _Karabiner 98 kurz_ bolt-action rifle from WWII, now available in your pocket, shooting 6mm caliber plastic airsoft BBs!

Includes files for both iron-sighted and scoped variants!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. Use supports for _Stock_ and _Barrel_. If you print the _Stock_ nose down with supports, you can nicely color the band around the front of the stock with a filament swap!

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Kar98k Bolt-action Rifle Keychain — Functional Blaster Toy

Kar98k Keychain - Bambu Project.3mf

The perfect way to hang your [Pistol](https://than.gs/m/1137222?affiliateCode=Jaatinen3D) or [Glock Keychain](https://than.gs/m/1146675?affiliateCode=Jaatinen3D)!

Comes in 4 different variations:
- *Compact* — Small holster with nothing extra.
- *Plain* — Full size holster with no hook.
- *Round hook* — Full size holster with a round hook.
- *Angular hook* — Full size holster with an angular hook.

For the non-compact variants you can print an optional decorative strap with a buckle (also optional)!

&nbsp;

---

**Printing tips:**
No supports required! Parts are already optimally oriented.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Keychain Pistol Wall Holster — For Glock & Pistol Blasters

Pistol Keychain Wall Holster Plain.stl

This military weapon crate inspired hinged and latched gift box is perfect for gifting or selling any and all of my [Keychain Blasters](https://than.gs/c/75244?affiliateCode=Jaatinen3D)!

It comes with an insert for each Keychain Blaster I've released (and I will be adding one for each I release) that has appropriate slots for ammunition and key ring.

It also works nicely without the insert for all kinds of small bits and bobs!

&nbsp;

---

**Printing tips:**
No supports needed. All parts are oriented optimally in the files.

I recommend printing the latches slow and steady with "precise walls" enabled to make sure the filament holes are not too small.

Use low layer height or adaptive/variable layer height for the lid to minimize layer visibility on the sloped parts of the lid bars.

You can print the inserts with low percentage Lightning infill to save time and material.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
Use a piece of 1.75mm filament as pins for the hinges in the lid and latches, as well as for the catch bar for the latches. Use a drop of superglue at the ends. See the project article in the **_Projects_** section of this page for example pictures.

Then glue the corner deco plates onto the crate corners and you're done.

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Keychain Blaster Gift Crate

Weapon Gift Crate - Bambu Project.3mf

Insert (Kar98k).stl

_Is that a banana in you pocket or are you just happy to print Jaatinen3D's new keychain blaster?_

&nbsp;

---

**Printing tips:**
No supports needed! Parts are already oriented optimally. If you're using OrcaSlicer or Bambu Studio, there's a handy .3mf project file included with painted banana!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 15-25mm long and one M3 bolt at least 12mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Banana Blaster Keychain — Functional Blaster Toy

Banana Blaster Body.stl

Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the _Frame_ and _Slide_. You can print the _Slide_ either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain — Functional Blaster Toy

Frame.stl

I love designing **toys**, **tools** and **decorations** while experimenting with different techniques to make the most of the vast capabilities of 3D printers. My aim is to make fun and useful models that require minimal or no supports and are easy to print and assemble.

I always test all my models thoroughly before publishing.
&nbsp;

---

&nbsp;
Please **leave a like** on my models if you enjoy them and **follow my profile**, it would be greatly appreciated! ❤️

If you print any of my models, **post a make here**, I love seeing them!
&nbsp;

---

&nbsp;
You can also [join my Discord server](https://discord.gg/rSN7U7mn7P) to chat about 3d-printing, get sneak peeks of upcoming projects and other fun stuff!
&nbsp;

---

&nbsp;
Please also consider subscribing to my **membership**. There's a tier for everyone!

**For a limited time use the code "HAPPY50" and get a 50% the first month if you subscribe at least 2 months. Cancel anytime after the second month.**

----------------------------------------------------------

**My wife was ready to buy a pencil holder for our daughter, but I said, 'Hold my beer.' Ten minutes and 2 beers later—boom! The world’s simplest, most beautiful pencil holder was born. Who needs stores when you have a 3d printer?**

Cute pencil holder or organizer with 6 compartments that are great to store all sorts of things like pencils, markers, etc. 

I have printed mine with fuzzy skin and I used green PLA+ HS Filament High Speed filament by Antinsky.

Prints easy, no supports needed!

Includes:

-Handle.
-Holder for a tight fit (Tight fit of the handle so it won´t need glue)
-Holder regular fit (It might need glue).
-Pre configured Factory Files for Bambu or Orca Slicers, with added fuzzy skin all around.

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

➡️ https://linktr.ee/ik3d

3D PRINTING SETTINGS:

-No supports needed

-0.2mm Layer height, 5-10% infill, 2 walls

Pencil Holder Organizer With 6 Compartments

Pencil Holder.stl

Adorable cat butt ornament with a knitted texture all around.

Super easy to print, needs no support at all!

I have added 4 pre painted versions, but you can get creative and make your own too!

Includes:
-Knitted Cat Butt Ornament STL
-4x Pre painted Factory Files compatible with Bambu and Orca Slicers

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

➡️ https://linktr.ee/ik3d

3D Printing Settings:

-No supports needed!

-0.16mm Layer height, 6% rectilinear infill or more, 2 walls

Knitted Cat Butt Ornament / 3MF Included

Knitted Kitten Butt Ornament.stl

**This beautiful house can be printed in a single piece or by parts that attach together for a nicer and full of color print.**

These houses are specially beautiful when you add a light inside as the glow. You can use a LED candle or fairy lights. I specially like the effect of the fairy lights as you can add some inside the smoke and it will also glow. 

**Included:**

-Single piece house for fast printing.
-Multiparts house, including: house, chimney, smoke, wall panels, roof and tree and Santa shadows (These can be printed in black and glued from the inside for a nice effect).
-Factory Files for Bambu and Orca Slicers for all the parts.

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

➡️ https://linktr.ee/ik3d

----------------------------------------------------

3D PRINTING SETTINGS:

-No supports needed.

-Super easy to print by parts.

-0.2mm Layer height, no infill but 4 walls, brim recommended for roof and shadows.

-Works with LED tealights and fairy lights. I used the 10 fairy lights with a tiny battery pack like this one: https://www.amazon.com/Etinga-Operated-Brightness-Christmas-Decoration/dp/B0BZQ2LJS2


Light Up House For Tealights and Fairy Lights Multiparts

House One Piece.stl

**This ornament features the iconic Grinch wearing a classic Santa Claus hat, complete with a naughty expression that hints he’s up to no good.**

I designed this model so **everybody can enjoy it in colors** even if you have a single color 3d printer! It´s also very easy to print, and it only needs a few supports on the red part of the hat, everything else prints without supports.

This ornament prints in separate parts, allowing for multi-color customization, but also single piece files for multicolor printing.

Including:

-Grinch head
-Scarf
-Nose
-Eyes (Set a pause on your printer to print the top of the eyes black)
-Hat top and bottom
-Pre configured 3MF Factory Files for Bambu and Orca Slicers to print by parts with and AMS and also without an AMS and also in a single piece with an AMS. 
-Includes easy to paint STL files that works on most slicers. Use the bucket tool but remember to turn on edge detection to the maximum before you start painting it. 

The assembly is simple—just print the pieces in your preferred colors and glue them together (I like to use Loctite Superglue)

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

➡️ https://linktr.ee/ik3d

-------------------------------------------------------

3D PRINTING SETTINGS:

-Super easy to print, only the ¨top hat¨ file needs a few supports.

-2 Walls, 7% rectilinear infill and 0.16mm layer height or lower. Use a brim for the head, eyes and nose.

-To glue the parts together, I like to use Loctite Superglue.



The Grinch Ornament Multiparts / Easy Print

Head.stl

Hat (Red) No Ring.stl

Grinch Single Piece Color Print FF.3mf

Grinch Single Piece Figurine (Multicolor).stl

Grinch Single Piece Ornament (Multicolor).stl

**An adorable model of Grogu in his crib, with a knitted texture all around, wearing a knitted Santa Claus hat.**

It´s super easy to print! Only the ¨head¨ file on the multi parts version needs a few supports under the ears, and it can be printed in multi parts that can be glued together, but also in a single piece in colors if you have a multicolor printer.

**Includes:**

-Multi parts version, so anybody can enjoy this model in colors with any 3d printer
-Single piece Grogu that can be easy colored on Bambu Studio or other slicers with the bucket tool.
-Pre configured Factory Files for Bambu Studio to print Grogu in a single piece, in multi parts with an AMS and in multi parts without AMS.

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

➡️ https://linktr.ee/ik3d

3D PRINTING SETTINGS:

-Super easy to print, only the ¨head¨ file needs a few supports under the ears.

-2 Walls, 6% rectilinear infill and 0.16mm layer height or lower.

-To glue the parts together, I like to use Loctite Superglue.



Knitted Grogu With Santa Claus Hat Ornament / Multiparts / 3MF Included

Grogu Santa One Piece.stl

I always loved the look of this classic planter shape but wanted one with proper drainage. It has a hidden drip tray that twists off, allowing you to dump excess water or water in the sink with the tray removed.

**Supports**
None needed!

**Scaling**
Can be scaled up or down. Just try not to go too small or large as the drip tray won't click into place as easily.

**Orientation**
The planter and tray should have their bottoms on the build plate.

**Print Settings**
.2mm layer height
15% grid infill
2 walls

**Filament & Hardware**
Filament: Bambu Lab Matte Dark Red PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

The Harlow - Planter with Hidden Drip Tray

Harlow Pot 6.stl

An adjustable, articulating task lamp that clamps to any surface up to 1.75" thick! The light is attached with a ball and socket joint so it can swivel 360 degrees. The light is rechargeable via USB-C and can be dimmed with a long tap.

**Supports**
Supports are necessary for one side of the extension arms, the ball joint, and the tap light housing.

Support settings I used:

Extension Arms
- Normal, Snug supports
- I used PETG as a support interface. This is not necessary but results in a much cleaner surface. PETG and PLA do not stick together so the PETG can be peeled right off. If using Bambu or OrcaSlicer, set Support/raft interface to PETG, Top Z distance to 0, and Top interface spacing to 0. Note that you must have an AMS to do this. You can absolutely use normal PLA supports for this, but the PETG interface is what I used.

Ball Joint
- Normal, Snug supports

Tap Light Housing
- Tree supports

**Scaling**
This one cannot be scaled as it is designed to perfectly fit the tap light.

**Orientation**
- Extension Arms - on their sides
- Tap Light Housing - flat side down
- Mount - on its side
- Mount screw and cap - flat side down
- Screws and caps - flat side down
- Ball Joint - flat side down

**Print Settings**
.2mm layer height
15% grid infill (at least 30% for screws)
2 walls

**Assembly**
1. Insert Mount Screw through bottom of mount
2. Thread Mount Screw Cap onto Mount Screw
3. Line up an extension arm to the Mount and insert Screw through hole
4. Thread on Screw Cap tightly. Note that it possible for the screw and cap to loosen over time. You can apply a small amount of glue inside the cap threads if you want to be sure it never comes loose. Or you can just retighten it if it comes loose.
5. Repeat steps 3 and 4 to add a second extension arm
6. Attach the ball joint
7. The tap lights come with a bunch of sticky backed magnets. Insert the included magnet into the recess in the Tap Light Housing
8. Press the Tap Light Housing onto the Ball Joint

**Filament & Hardware**
Filament: Bambu Lab Ivory White Matte PLA
Hardware: Tap lights can be found in my Amazon Storefront at the link below. This is the exact Amazon listing name - DAZZY DOT Rechargeable Puck Lights 2 Pack, Magnetic Tap Light 1000mAh Battery Powered, Warm Yellow，Dimmable Touch Light Stick on for Closet, Locker, Cabinet, Bedside, Kitchen

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Articulating Task Lamp

Touch Light Housing.stl

A simple little stake that allows you to hang a test tube off the side of a pot to propagate your plants! The link to buy the test tubes is at the bottom of this description. If you don't want to buy glass test tubes, I've also included a printable test tube.

**Supports**
None needed!

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the test tube.

**Orientation**
The stake prints upside down.

**Print Settings**
.2mm layer height
15% grid infill
2 walls

**Filament & Hardware**
Filament: Bambu Lab Matte Ivory White PLA
Hardware: EISCO 32PK Test Tubes, 30ml

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Propagation Stake

Propagation Stake.stl

This is an attachment for [The Rail](https://thangs.com/designer/LoftedGoods/3d-model/The%20Rail-1144868) that allows you to attach a test tube to propagate your plants!

Links to the test tubes I use are at the bottom. I've also included a 3D printable test tube if you don't want to buy them. Would be super cool to print them in some translucent PETG.

This system uses a 1"x36" dowel (the length doesn't really matter), but if you're outside the US, you can use the set screw for 25mm dowels. Or you can print the included dowel (18").

**Supports**
None needed!

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the dowel.

**Orientation**
This attachment should print upright, with the recess for the test tube towards the top. The set screws print with the threads facing up.

**Print Settings**
.2mm layer height
15% grid infill (99% for set screws)
2 walls

**Filament & Hardware**
Filament:
- Bambu Lab Ivory White Matte PLA

Hardware:
- EISCO 32PK Test Tubes, 30ml
- #8-10 x 1 in screws and anchors

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

The Rail - Propagation Attachment

Propagation Mount.stl

Designed in collaboration with [Gazzaladra](https://thangs.com/designer/gazzaladra)

This planter was designed using a 3D scan of a real ash tree! It looks super realistic and the bark texture hides the drip tray really well.

These can mount to your wall using command strips or screws and feature a hidden, twist off drip tray.

Two sizes available (2.75" and 4.5") and two variations for each size (wall mounted or tabletop).

**Supports**
None needed!

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

**Orientation**
The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

**Print Settings**
.2mm layer height
15% grid infill (gyroid for wall mounts)
2 walls

**Filament & Hardware**
Filament: Bambu Lab Dark Brown Matte PLA
Hardware: Command Medium Picture Hanging Strips
#10-12 x 1-1/4 in anchors and screws

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tree Bark Planter

Tree Bark Pot 4.stl

Thoughtfully designed objects that people are willing to proudly display in their homes. Planters, vases, lighting, home accessories, and more!

Most wins

thelightspd