2D3D
Makes
These models are designed to print with a .4mm nozzle, .20 layer height, 10-15% infill, 1-2 walls, with "Detect Thin Lines" on. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size up these models without any issue, but you may not be able to size down much without a .2mm nozzle, as it may cause issues.
If you print any of these models, please upload pictures! :)
Note: These files are bound by the licensing terms of the applicable paid membership.
0 Likes1 DownloadsJune 28, 2024