With Mother's Day coming up soon, I wanted to make something special for my daughter to give to her grandma, who loves elephants. I figured I would share the different iterations I came up with, so you can feel free to use them as well! :)

I included the 4 iterations complete in 3MF files, 4 STLs of the different fonts/styles/verbiage, 2 frame STLs (with and without the mounting hole), and the model of the elephants. This should be fairly easy to print in separate colors and glue together after.

The models are all designed to print at .20mm layer height, 2 walls (I used 3 walls on the frames, but it shouldn't be needed), 15% infill.

If you make any of these models, please upload your pictures! I would love to see them! :)

Lost Without You - Mother's Day Elephants

I Would Be Lost Without You - No Border Words on Frame.3mf

Marvel Jesus has cometh! He's here to save the multiverse and restore balance to the MCU! Let's just hope he's not too late ;)

This model was so satisfying to make and print and I want to make more stained glass-style models in the future, because they're so fun!

I attached a 4 color 3MF for use with an AMS/MMU, as well as individual files that make up the individual colors (Black, White, Dark Red, and Bronze). Printing the model as a multicolor part will definitely be easiest with an AMS/MMU, but I added the colors separately in case anyone wanted to try anything different.

The Outline file would look awesome on its own, without the other colors :)

I designed the model to print at .20mm layer heights, 1 wall, 15% infill.

If you print it off, please share any pictures you have :) Enjoy!

Deadpool Stained Glass

Deadpool-Stained-Glass 4 Color.3mf

I uploaded a couple of files to make this as easy to print for those want to.

- 150mm (STL and 3MF)
- 200mm (STL and 3MF)

The files are designed to be printed at .20mm layer height (all layers), 2 wall, with 'Detect Thin Walls' on. You should be able to size up without any issues; if you sized down beyond the 150mm, you could run into issues with small details showing up properly.

I would love to see any makes you do. If you make this model, please upload your picture(s)! :)

Vampire Skull

Vampire Skull - 200mm.stl

As difficult as it is to realize, we are the cause of a lot of our own problems. Our choices guide our paths and impact our lives in profound ways. This model was designed to be a reminder for myself to remember that a lot of the hardest things I had to deal with in my life were self-caused and to be more careful and calculating when I am able, to potentially avoid negative consequences.

I uploaded a couple of files to make this as easy to print for those want to. There is an "Auto Color Swap (AMS)" version for use with multi-color printers, allowing it to be printed face-down and flat on the print bed. There is also a "Raised (Manual Color Swap)" version that allows you to add a manual color swap at layer 8. Both files are designed to be printed at .20mm layer height (all layers), 1 wall, with 'Detect Thin Walls' on. You should be able to size up without any issues; if you sized down, you could run into issues with the text and/or small details showing up properly. If you increase the Z Height, make sure to adjust the color changes when setting up the file to print.

I would love to see any makes you do. If you make this model, please upload your picture(s)! :)

We're All Devils in Our Own Hells

We're All Devils in Our Own Hells - 4-Color Auto Color Swap (AMS) Bambu Lab.3mf

I don't know about you, but I love models of Cthulhu. I never tire of trying to re-imagine him in a variety of manners, some that are loyal to his intended terror-filled origins and some that are like this. I present: Coolthulhu! He's the kind of Great Old One you want to have a Nice Cold One with on a sunny Saturday. Of course, I couldn't just stop at one way to display this awesome design, oh no, I had to come up with multiple ways to show him off. I'm still working on some other models that will incorporate him, but this upload includes two: Raised (designed to be easy to manually filament swap) and the original AMS version

Files included:

- Coolthulhu - Raised (STL) model: This model features a solid background, with Coolthulhu's awesome design placed on top for easy manual or AMS/MMU filament swaps. If printing at original Z height and .20mm layer height, add a filament swap at layer 6 for a clean cut-over to highlight the model's best features.

- Coolthulhu - AMS (Bambu Studio 3MF) model: This one is my personal favorite! I built this file to take advantage of the ability to automatically swap filaments in the middle of a layer, so the model doesn't need to be printed at different heights for different colors. This results in a clean look that I am just loving! If you have a Bambu Lab printer/AMS, this one is a must! All set up and ready to go!

- Coolthulhu (raised color) - AMS (Bambu Studio 3MF) model: If you're looking for an easy way to print the "Raised" version and you have a Bambu Lab printer/AMS, this one is the one for you. All set up and ready to go!

- Coolthulhu (raised color) - Manual Filament Swap (Bambu Studio 3MF) model: If you're looking for an easy way to print the "Raised" version, but don't have an AMS, this one is the one for you. The filament swap is already added at layer 6.

Designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in, but one likely won't be needed. You should be able to size up or down without much issue.

If you make either of the models, please upload your pictures. I would love to see them!

Coolthulhu

Coolthulu - Raised.stl

This model was designed to capture the essence of an ancient, nameless evil that also happens to look great as wall art! Designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in, but one likely won't be needed. You should be able to size up or down without much issue. I'm currently printing this model to hang on my wall and I'll post the final result once it's all done!

If you make this model, please upload any pictures. I would love to see them!

Ancient Evil

Ancient Evil.stl

I made this model as a custom request for my friend Jayne. She loved the way it came out and I hope you do too! The model is designed for .20mm layers and 2 walls. It is also designed to lay flat on its face and have a color change after layer 1, which can easily be done either manually in your slicer or with an AMS/MMU. I chose to do layer 1 in black and the rest of the layers in red. Because of the design on the first layer, the next layer is slightly offset and I think it adds a nice contrast.

Let me know what you think and please upload any makes! :)

**Someone pointed out to me that the file is split into two floating parts. No idea how that happened, because it was fine before when I printed it...twice. I replaced the previous files with fixed ones.**

Jayne's Demon

Jayne's Demon.stl

"What has risen may sink, and what has sunk may rise. Loathsomeness waits and dreams in the deep..."

I've always been fascinated with Cthulhu's design from the first time I saw it. This model was inspired by that fascination. It is designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up fine, but I personally wouldn't size down too much, as it may cause issues.

This model printed beautifully on my Bambu Lab P1S.

Lovecraftian

Lovecraftian.stl

This series of 7 models was inspired by the incredible journey that I have been on while raising my daughter. She is my heart, my best friend, and my reason for being. She is "Daddy's Sunny Days." I hope you enjoy these models as much as I have enjoyed creating them and I hope they bring you the same joy they bring me when I look at them and am reminded of all the little moments I have had with my daughter.

If you make any of these, please share! I would love to see them! :)

I designed these models to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up or down fairly easily.

A Father's Love - Series

A Father's Love - 1.stl

I'm pretty excited about this one. This model was inspired by the mythical phoenix and is designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up fine, but I personally wouldn't size down too much, as it may cause issues.

I added the original STL, as well as two pre-painted 3MF files for use with Bambu Labs machines with an AMS. One 3MF is combined and ready to print, the other is separated, so you can easily change the colors of each section as you please.

I would love to see any prints, especially if you try different colors! :)

Phoenix

Phoenix.stl

"Greed is the root of all evil." This model was designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up or down without much issue.

The Salesman

The Salesman.stl

This model was inspired by my love for large kaiju (monsters) is designed to print with a .20 layer height and 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. You should be able to size up fine, but I personally wouldn't size down too much, as it may cause issues.

Kaiju

Kaiju.stl

This model printed great on my Bambu Lab P1S with .20 layer height, 2 walls. A brim may be needed if your printer's adhesion isn't dialed in. I sized this up after printing, because I realized it was a little small the first time. The model should easily resize with no problems.

Geometric Demon

Geometric Demon.stl

This model printed great on my Bambu Lab P1S with .20 layer height, 2 walls. A brim may be needed if your printer's adhesion isn't dialed in.

I used blue tape to keep all of the individual pieces together when removing from the plate, which worked flawlessly.

Devil in the Details

Devil in the Details.stl

Silhouette art I made of some anime-style characters. I made 2 different versions, 100 X 100mm and 200 X 200mm, both with the same height. This is the 200 X 200mm version. I started with red PLA and switched to black PLA at layer 3.

Anime Silhouette - Large

Anime Silhouette 200 X 200.3mf

Silhouette art I made of some anime-style characters. I made 2 different versions, 100 X 100mm and 200 X 200mm, both with the same height. This is the 100 X 100mm version. I started with red PLA and switched to black PLA at layer 3.

Anime Silhouette - Small

Anime Silhouette 100 X 100.3mf

Ancient Evil.3mf

Coolthulhu - Raised.stl

Coolthulhu (raised color) - Manual Filament Swap.3mf

Coolthulhu - AMS.3mf

Coolthulhu (raised color) - AMS.3mf

We're All Devils in Our Own Hells - Raised (Manual Color Swap).stl

Deadpool-Stained-Glass-Outline.stl

White.stl

Bronze.stl

Dark Red.stl

I started 3D printing at the beginning of 2023 and now I'm ready to share my own models. Please let me know what you think!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>I started 3D printing at the beginning of 2023 and now I&#x27;m ready to share my own models. Please let me know what you think!</p></div>

jasaa3d

Pinned models

Ancient Evil

Coolthulhu

We're All Devils in Our Own Hells

Deadpool Stained Glass

Lost Without You - Mother's Day Elephants

Deadpool Stained Glass

Vampire Skull

We're All Devils in Our Own Hells

Coolthulhu

Ancient Evil

Jayne's Demon

Lovecraftian

A Father's Love - Series

Phoenix

The Salesman

Kaiju

Geometric Demon

Devil in the Details

Anime Silhouette - Large

Anime Silhouette - Small