Wall rack to organize your climbing equipment. Holes are arranged horizontally to quickly add/remove biners. Printed vertically for max strength

Also included the Fusion file

Climbing Gear Rack

gearrack.stl

Uses 6x2mm magnets. I suggest adding fuzzy skin for that great finish. Also attached the Fusion 360 file.

Magnetic 57mm Dosing Funnel

Dosing Funnel.stl

Plenty strong. Used them with full power without any issues. 100% infill to maximize weight & strength. You could geek out and do gradual infill to balance the center to mass around the rod.

Attached the Fusion file as well

Foosball Table Soccer 5/8" 16mm Replacement Player

Foosball Player.stl

Been using this for years now with no issue!

The pivot is from something called  "lazy susan" (6 inch).
Can be found at hardware stores or amazon for cheap . The adapter just falls in place.
Found it works best with some tubing to guide the filament.

Attached the Fusion file as well

Horizontal Spool Holder on Smooth Bearings

The pivot is from something called  "lazy susan" (6 inch).
Can be found at hardware stores or amazon for cheap . The adapter just falls in place.
Found it works best with some tubing to guide the filament.

Fusion link: https://a360.co/3oxzIds

pulsesensor.com

Snaps closed. A bit loose over time. Webbing opening: 27mm

To improve live-hinge mechanism:
Print at 0.2mm layer height 
Bottom Pattern Initial Layer: Concentric (Cura slicer)

Attached the Fusion file as well

Pulse Sensor Heartbeat Snap Case

pulsesensor.com

Snaps closed. A bit loose over time. Webbing opening: 27mm

To improve live-hinge mechanism:
Print at 0.2mm layer height 
Bottom Pattern Initial Layer: Concentric (Cura slicer)

Fusion Model: https://a360.co/3MKFR07

2x1
Holds the sucker loosely at 22.5mm
Tip holes are 7.3mm
Added a slot for holding wick

Attached the Fusion file as well

Solder Sucker and Hakko Tips Holder

2x1
Holds the sucker loosely at 22.5mm
Tip holes are 7.3mm
Added a slot for holding wick

Fusion: https://a360.co/3Us7qgs

2x2 size.
Holds a 65mm container pretty snug. 
The lip is 12mm tall



Gridfinity Solder Paste Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

zwaky

Achievements

Seedling

Debutant