If you want to use other slicing software, please use the raw STLs when importing into your slicer, as the Bambu Studio one does not work outside Bambu Studio. Please be aware that only the Bambu Studio 3MF has paint data on them.
These articulated snakes have 36 joints, though at the scale I have provided there is plenty of room for more links, should you want to add them!
All body links, except the one closest to the tail-tip, and the rattle, are identical so you can copy/paste them to make the body longer.
The size I have provided is the largest I could make the full-colour version before printing time became too long. Be aware that bleeding can occur if your filament has additional qualities to it (such as sparkle glitter).
If you use a textured PEI plate, a brim is needed.
Whilst supports are NOT needed on the Rattlesnake/Ekans, I recommend using supports on the "head" portion of the Cobra/Arbok, as it is tall. Do not use supports anywhere else.
This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required. If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards