Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5409550.

Father and Child statue...

Fathers Day 2022

Fathers Day 2022.stl

Biqu H2 5015 Part Fan holder, has access to the manual feed gear. Also, slim enough to not need to decrease size of Y axis (at least on Ender 6).

**April 17 2022 **- Old design was causing resonance during fast XY moves. Added more bulk to the attachment point for the blower fan and for the adaptor itself. Adjusted the air exit to blow more directly on the extruding filament.

E6 H2 5015 Part Fan.stl

Biqu H2 5015 Part Fan holder, has access to the manual feed gear. Also, slim enough to not need to decrease size of Y axis (at least on Ender 6).

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5238306.

Made this planter pot for all the love birds out there.

Heart Shaped Planter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241397.

For the love stinks crew...

11/02/22 - enlarged the inner volume, scaled down the pedestal...

Broken Heart Planter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4849378.

June 22nd 2021- made larger holes in lid, old ones were too small...Also made it so you don't need supports to print the lid, after printing clean out the holes and you should be good to go.

This is a shaker container I made for grated parmesan cheese. Can be used for sugar, spices, large grain salt etc....

I've included the embossed container with "Parmesan Cheese" on it and a plain container.

Shaker Container with Screw on Lid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4914061.

Designed this case to house an Arduino Uno R3 and an SSD1306 0.96" OLED screen for a weight scale I am building to weigh my big dogs. Will make another post about the scale in the future.

The Uno and the screen are pressed onto pegs on the case. M3x8 screws to hold the case together.

Arduino Uno R3 Case with OLED Screen and Battery Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900905.

Designed this case to fit my Pi cam, as the ones on here were too small for my cam. Camera pod can be removed in case of repairs

The cam I got: https://www.aliexpress.com/item/32831783732.html?spm=a2g0s.9042311.0.0.43e54c4dvLrEnp


You will need;

- 2 m3x8 socket cap screws for the camera case
- 1 m3x12 socket cap screws for turret to base
- 3 m5x20 socket cap screws and m5 nuts for mount arms (more if you need more arms)

Mount snaps to a 2020 profile...

Pi Cam with IR case and mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4733643.

This is a safety hoop with integrated harness I made for my blind 18 yr. old pup, to stop her from banging her head against the door frame or walls. 

The hoop is sized really small from exporting from Lightwave to an .OBJ file. So, in your slicer/3D program, you will have to resize to fit your pup. My Sienna is only 2lbs so she is quite small, so I was able to print in one piece.

Update 23/01/2021: V2 enlarged hoop and lifted higher, hoop now ends further back towards back of head.

Update 24/01/2021: V5 added an arm going over the top of hoop, from front to rear, to help hold the front of the hoop higher. Also made it more robust, the hoop broke while taking it off the build plate, wasn't enough infill. Going to print with a 40% infill and see how it goes, don't want to make it too heavy...

Update 27/01/2021 Final: Hoop was too heavy for my pup, so I slimed it out and made the arm over the head have a steeper arc....

PS...she still hates wearing it lol

Sienna's Blindness Safety Hoop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900847.

A case I made for my S21 Ultra...

I made the back blank so you can emboss any design you want on the back.

Galaxy S21 Ultra 5G Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4892167.

Designed this throttle control for my Echo SRM-210 Brush cutter, after mine broke.

Echo SRM-210U Brush Cutter Throttle Trigger

Echo SRM-210U Throttle Trigger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4975395.

An outlet box extender to use after renos...

In 20mm and 10mm depth...

Outlet Box Extender

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

windbane

Achievements

Seedling

Explorer

Debutant