Hello people!
Today I'd like to share with you my first F360 design. It is a rail mount for my Anet ET4 (which uses 20x20 aluminium profiles) to fit a 7" display from waveshare.
It fits for M3 screws, >=16mm length. I left some room for the connectors and also for the nuts.
This will likely be updated soon as I want to mount the PI on it aswell, or maybe make some cable clips to it.
Just import the mount to your slicer and make sure to print 4x the risers aswell!
I've used 2mm outer brims to print it, but I have yet to try to print it without.
Dimensions are:
Total rail length: 167mm display screw holes distance (top to bottom): 115mm display screw holes distance (left to right): 157mm
Print Settings Printer: ANET ET4+ w. Klipper
Resolution: 0.2
Infill: 10%
Filament brand: ZHINGTONXILIAN
Filament color: Silk Blue
Filament material: PLA
Notes: It's my first filament, it works quite well for me, but I bet you get better results with a better one.
I've only tried to print this with 2mm outer brims so make sure to enable it or check if it works.
10% Infill with Support Cubic works really well (even on touch moves it doesn't really bend)
I've rotated the mount in the slicer to 310° (to make it align with X)
How I Designed This Designed using Fusion360