_THE ACTUAL FILES ARE LOCATED IN THE ZIP FOLDERS. _ This is the Gear Rhombo & Gear Rhombo Junior (Jr.) (the Spirit of Mini Gear Sphere). This is totally redesigned from the Gear Sphere by TNTBA. With this purchase you get:

1. 3MF and STL files for all parts (Gear Rhombo & Gear Rhombo Jr)
2. X1 Carbon & A1 Mini layouts
3. License to print and sell this model - Forever!

For Gear Rhombo: UPDATE June 9th, 2024: New clips have been added to provide the option of having a tight gear Rhombo or a smooth gear Rhombo. The new clips allow for smoother manipulation and play with the gears which people may enjoy more. TRY IT BEFORE YOU BUY IT Print time is approximately 6 hours. Approximate size of the Gear Rhombo is 122mm x 122mm x 116mm

Gears and Core can be printed in any material of your choice. Clips SHOULD be printed in PETG. Tool is not required for installation

For Gear Rhombo JR: UPDATE June 9th, 2024: New clip tool has been added to the file to allow for easier assembly. This Gear fidget toy is a lot of fun and is now portable. TRY IT FOR FREE BEFORE YOU DECIDE TO BUY IT! Approximate size of this design is: 50mmx50mmx50mm.

The time to print and fully assemble is approximately 1 hour and 15-30 minutes.

Gears and core may be printed in any material. Clips should be printed in PETG. Tool can be printed in PLA.

Place the clip into the tool and use the tool to place the clips directly into the holes of the gears. Make sure you go directly into the hole to avoid splitting, breaking, or over-bending the clips. I would recommend that you print out additional clips to ensure you have extras when you mess up.

Once the clips are installed, you can place the gears following the numbering located on each gear and core side. Still having issues? Please watch this assembly video!

The mechanism to move this toy fidget was inspired by RuvenBals' Gear Ball and Emmett's Gear Cube.

Enjoy!