tracking pixel
Travis B

BEVRAIL 1.0

by
travis.bentz
Follow
Follow
Remix Model
travis.bentz
travis.bentz
|
Image 1 of 9
BEVRAIL 1.0 3d model
travis.bentz
travis.bentz
|
Image 1 of 9
BEVRAIL 1.0 3d model
2D
3D
Makes
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model
BEVRAIL 1.0 3d model

Modular beverage conveyance device inspired by rustyshakleford777's TactiCoozie. I was unable to print the TactiCoozie on my A1 mini so I tried to create something of the same spirit which would work on that printer.

The BEVRAIL differs from the TactiCoozie in that it includes multiple primary components. The main body maxes out the height of the A1 mini while still allowing the use of a dimensionally accurate carry handle. Rails are dimensioned to published NATO rail specs and allow for use of both tactical and photography accessories. The screw on bottom is hollow to allow for ballasting which allows for more extravagant accessories without tipping. Included are designs for can sleeves which hold the can secure, provide additional insulation, and help to protect the main body from condensation. Included is a lifter insert which works with the lifter insert lifter to facilitate appropriate placement of the 12 oz spacer and with the lifter insert plug for appropriate placement of the large can spacer. The holes in the lifter insert are intended for 3 x 30mm stainless steel dowels which provide a hard stop for the lifter insert lifter at the perfect height for the 12 oz can spacer to sit flush with the top of the main body.

Tacticoozie can be found at https://www.thingiverse.com/thing:607533.


0 Likes0 DownloadsNovember 14, 2024



0 Likes0 DownloadsNovember 14, 2024