titrisol

Voigtlander Vitessa Lenshood

by
titrisol
Follow
Follow
Remix Model
titrisol
titrisol
|
Image 6 of 7
Voigtlander Vitessa  Lenshood 3d model
titrisol
titrisol
|
Image 6 of 7
Voigtlander Vitessa  Lenshood 3d model
2D
3D
Makes
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
Voigtlander Vitessa  Lenshood 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4618831.

Voigtlander Vitessa is a very cool camera, the original hood was the 125/20 which is a push-on external hood. Those are hard to find and expensive.

My Vitessa N with Color Skopar 3.5 has a OD of 34.5mm and ID of 33.0mm. This dimensions have also been confirmed for the Ultron 2.0 lens in the Vitessa A series and the Skopar 2.8 in the latest series.

This is a remix of https://www.thingiverse.com/thing:1168491/ and https://www.thingiverse.com/thing:39683

R1 has 2 versions, one for mounting outside the lens (external) and one to mount inside the lens (internal)

R2 is a modification of the previous, only for external mout, with thicker wall and larger rectangular hood plus a hole for a cord/lanyard so you don't lose it.

I printed these in PLA, adjust your scale for shrinking is using a different filament.


1 Likes4 DownloadsJune 28, 2022


1 Likes4 DownloadsJune 28, 2022
This model is restricted by licensing terms.