A more fantastical and elaborate take on last month's classic dragon style. Same locking wings. 3MF files painted as seen in the photos. Prints in place with no support.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

blossom dragon — articulated flexi print-in-place fidget fantasy creature

tinymakery blossom dragon unibody.stl

This one lies around and also sits up on front paws just like the cat! Eyes and ears are parted out for multipart printing. The full fox fur coloring will do best with a multicolor printer setup. Prints in place with no supports.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

little fox — articulated flexi print-in-place fidget animal

tinymakery fox unibody.stl

A little bird with flappy moveable wings that can lock into a raised position for fun poses just like the dragon. The 3MF files are pre-painted as seen in the photos. Multipart files have the eyes, beak, and claws parted out. Prints in place with no support.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

little bird — articulated flexi print-in-place fidget animal

tinymakery bird unibody.stl

A little dragon with flappy moveable wings that can lock into a raised position for fun poses. The 3MF files are pre-painted as seen in the photos. Prints in place with no support.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

little dragon — articulated flexi print-in-place fidget fantasy creature

tinymakery dragon unibody.stl

My absolute favorite animal! This sea turtle prints with its body and shell separate for fun color combos, and they snap together after printing. The 3MF files are pre-painted as seen in the photos. Prints in place with no support.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing with separate shell)
- unibody 3MF (single part multicolor printing with separate shell)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

tiny sea turtle — articulated flexi print-in-place fidget animal

tinymakery seaturtle unibody body.stl

A fuzzy critter! I always love seeing hedgehogs curled up in your hand, so I tried to make this one articulate to do the same. Prints in place with no supports.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

tiny hedgehog — articulated flexi print-in-place fidget animal

tinymakery hedgehog unibody.stl

One of my favorite lizards with its fun color patterns. This particular model was designed with multicolor printers in mind (Bambu AMS, Prusa XL, etc.) and prints in place with no supports.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

tiny gila monster — articulated flexi print-in-place fidget animal

tinymakery gilamonster unibody.stl

A baby cheesemonger! Printable in parts for single color printers or as one piece with the included 3MF paint file. Prints in place with no supports.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

tiny mouse — articulated flexi print-in-place fidget animal

tinymakery mouse unibody.stl

A little furry friend that lies around like a proper lazy bum. Will also sit upright on front paws to beg for food. Prints in place with no supports.

Please consider supporting my work with a [Thangs membership](https://thangs.com/designer/tinymakery/memberships?affiliateCode=tinymakery). Memberships include commercial licensing to sell physical prints of all _tinymakery_ designs.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless encountering adhesion issues
- **PEZ / polyurea plate** recommended
- **80% scale** tested

**Licensing:**
These model files are for your personal use only. Holding an active Thangs membership status grants you commercial licensing to sell physical prints made with these model files. Files are not to be shared or resold. Modifications may only be made for personal and non-commercial reasons.

tiny cat — articulated flexi print-in-place fidget animal

tinymakery cat unibody.stl

Thank you for considering joining and supporting my work! As a supporter, you will have access to:

**FOUNDER BONUS**: The entire catalog is available to download for free upon joining. This bonus will be updated in the future to maintain fairness for all members.

**EXCLUSIVES (2025)**: Subscriber exclusive releases will begin January 2025.

**MONTHLY RELEASES**: All newly created designs are freely available. I aim to create at least two new designs per month and may also release bonus less time-intensive models, such as small trinkets or themed minor modifications to existing designs (such as holiday versions).

**EARLY ACCESS**: Monthly non-exclusive design releases are available to members at least one week ahead of the general public release.

**COMMERCIAL LICENSE**: You may sell physical prints of all _tinymakery_ designs for as long as you hold an active paid membership. (The digital STL/3MF files are not to be resold or shared.)

FOUNDER

Hi! I'm Austin. Here you will find a growing collection of articulated creatures and other related sculpts.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

tinymakery

Achievements

Seedling