A fuzzy critter! Hedgehogs are a favorite animal of mine. I always love seeing them curled up in your hand, so I tried to make this one articulate to do the same. This one prints as small as 4.1 cm!

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless adhesion issues arise
- **PEZ / polyurea plate** highly recommended
- **65% scale** tested for all models

**Licensing:**
These model files are for your personal use only. Commercial licensing is available to sell physical prints of all _tinymakery_ designs at [patreon.com/tinymakery](https://www.patreon.com/tinymakery).

tiny hedgehog

tinymakery hedgehog unibody.stl

A stubby alligator that prints well down to approximately 6.6 cm in length (65% scale). This little guy is super cute in your hand when you print him that tiny.

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless adhesion issues arise
- **PEZ / polyurea plate** highly recommended
- **65% scale** tested for all models

**Licensing:**
These model files are for your personal use only. Commercial licensing is available to sell physical prints of all _tinymakery_ designs at [patreon.com/tinymakery](https://www.patreon.com/tinymakery).

tiny alligator

tinymakery alligator unibody.stl

A little furry friend that lies around like a proper lazy bum. Will also sit upright on front paws to beg for food. Printable as small as approximately 6.6 cm (65% scale) with flow multiplier and pressure advance settings dialed in. Any smaller and the paws get stuck (I already tried it!)

**Files included:**
- unibody STL (single part printing)
- unibody 3MF (single part multicolor printing)
- multipart STLs (separate part printing and assembly)
- multipart 3MF (multicolor separate part printing and assembly)

**Print settings and recommendations:**
- **3 walls** at 0.4mm nozzle size
- **40-60mm/s outer wall** speed recommended
- **15% infill** (adaptive cubic, cross hatch, or gyroid)
- **no supports**, slow down for overhangs enabled
- **no brim** unless adhesion issues arise
- **PEZ / polyurea plate** highly recommended
- **65% scale** tested for all models

**Licensing:**
These model files are for your personal use only. Commercial licensing is available to sell physical prints of all _tinymakery_ designs at [patreon.com/tinymakery](https://www.patreon.com/tinymakery).

tiny cat

tinymakery cat unibody.stl

Hi! I'm Austin. Here you will find a growing collection of articulated creatures and other related sculpts. For commercial licensing options, please visit [my Patreon](https://www.patreon.com/tinymakery).

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

tinymakery

Achievements

Seedling

tiny hedgehog

tiny alligator

tiny cat