**Clip holder for vacuum pump**

This clip holder attaches to the vacuum pump for the air-sealed bags sold by 3Djake.

I kept loosing the clip that closes the bags tightly shut, so I made a holder that

Made for Vacuum pumps with diameter of about 33-34 mm.

I think this pump is a generic rebrand sold by others - your non-3djake pump will most likely be the right dimensions as well

**_Assembly_**

A bit of glue will attach the holder to the pump. I used standard superglue.

Use a small bit of 1.75mm filament to create the 'washing line' in which to click the clip holder. (See picture)

3DJake Vacuum Clip Holder

3djake vacuum clip holder.3mf

**Replacement wheel**

The original wheel for the Elegoo Mercury X Washing Station was badly designed and people often had the plastic crack due to the stresses caused by the set screw and the servo motor being having been too aggressively tightened. 
This print should can be printed in PLA, but I recommend ASA/ABS. Sorry, no resin version due to the heated inserts.

*The redesign features a reinforced center and several extra beams to prevent the flexing that I think breaks the plastic in the first place.*

**Heated inserts**

I used heated inserts to replace the holes that hold the magnets and the set screw. Any M3 insert should do, but I specifically made them for m3x5.7x (such as the ones sold by CNCKitchen). Put the heated inserts for the magnets in from the ‘bottom’.

**Printing tips**
This is a pretty straight forward print, but make sure to enable support for the magnet holes - unless your bridging is on point.

Released under Creative Commons - Attribution

Elegoo Mercury X Washing Station Replacement (internal) Wheel

Elegoo_Mercury_X_Replacement_internal_Wheel.3mf

Elegoo Mercury X Replacement (internal) Wheel.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

thijsiee.tv

Achievements

Seedling

3DJake Vacuum Clip Holder

Elegoo Mercury X Washing Station Replacement (internal) Wheel