Trying to make some better shoulder buttons for this awesome device! I like the angled L2/R2 layout that I made. They can feel like they stick and are keeping the button pressed but I checked the I/O and there was nothing being pressed. Trying to figure out what is causing this and will update the model if/when I find it.

Also seeing if I can find an alternative/better setup for the L1/R1 buttons as well. When I have that I will also update.

New Shoulder Buttons for RG35XXSP

Shoulder Buttons RG35XXSP v3.3mf

A grip to help with a little hand fatigue and placement.

For personal Use Only.

RG35XX-H Grip

RG35XX-H v10.stl

Stand to hold the charger at an angle while still maintaining a firm connection to charge.

Samsung Trio Wireless Charger Stand.stl

I got bored and figured I would make a cover for my Switch dock just for fun. I have to tell you it has been fun making these.

OLED Nintendo Switch Dock Cover

OLED Switch Cover Solid Color.stl

OLED Switch Cover LOZ v2.stl

Holder for the Logitech C270 Camera to go on the Z Axis mount I created for the Neptune 3 Pro/Plus/Max.

Mount Link: https://social.thangs.com/m/751446

Note: You will want to use the mount that has Logi appended to the end for this holder.

Logitech C270 Z Axis Cam Holder for Neptune 3 Pro/Plus/Max

Holder for the Logitech C270 Camera to go on the Z Axis mount I created for the Neptune 3 Pro/Plus/Max.

Mount Link: https://social.thangs.com/m/751446

Raspberry Pi Camera holder for the Neptune 3 Pro/Plus/Max Z Axis mount that I created.

Mount Link: https://social.thangs.com/m/751446

Raspberry Pi Camera Neptune 3 Pro/Plus/Max Z Axis Holder

I was looking for a way to get my Raspberry Pi camera connected to the Z Axis to my Neptune 3 Plus. I have been working for a while to get this looking just right. I think that I stuck gold and am I am finally ready to share it to the world. I hope that others find some use in this as well!

I used (2) M4x12 screws and nuts to attach it to the frame. It is not impeding any movement in any direction.

Logitech C270 Holder: https://social.thangs.com/m/751499

Raspberry Pi Camera Holder: https://social.thangs.com/m/751479

Neptune 3 Pro/Plus/Max Z Axis Camera Mount

I was looking for a way to get my Raspberry Pi camera connected to the Z Axis to my Neptune 3 Plus. I have been working for a while to get this looking just right. I think that I stuck gold and am I am finally ready to share it to the world. I hope that others find some use in this as well!

I used (2) M4x12 screws and nuts to attach it to the frame. It is not impeding any movement in any direction.

Neptune 3 Z Axis Camera Mount -Logi v1.stl

Nice knife holder or organizing your drawer. All of the knife slots are 4 mm wide. This has worked well for all of my knives. I also added a new one to have a spot for my microplane as well as my thermopen. 

In-Drawer Knife Holder

In-Drawer-Knife-Block-w_notches-Right-Body.stl

I had a 4 set collection of Avengers Bobbleheads that have been floating around. I made this base for them to all sit down in and it worked out super nicely. If you have any bobbleheads or figures with a base that is 40mm in diameter this will hold those perfectly!

Mini Bobblehead Figure Stand

Small_Bobblehead_Rounded.stl

My kiddos (like many others) have ripped their cardboard card box to shreds. For my first ever 3D model I have created my over engineered card box. 

Oversized Playing Card Box

Box-Bottom.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

thesneak155

Achievements

Seedling

Voyager

Up and Coming