Helldivers 2 - Autocannon Backpack - High Quality 3D Print Files!
bytheforgepropsTHE ONLY GOOD BUG IS A DEAD BUG!
Join the front line with this high quality Helldivers 2 Autocannon Backpack 3D print model!
This 3D print model comes separated into STLs for easy 3d printing- has 32 Main Backpack pieces and 19 strap cover plates.
The model has been designed with usability in mind- there are slots and pins to allow for 38mm nylon webbing to be run as straps, and the plate covers will conceal it, while allowing flexibility. You will need 2 10mm x 78mm steel rods for the top strap connection, and sewing needle/thread to sew the strap returns back to themselves. I would also recommend some good quality epoxy glue to glue everything together for strength! If you want functional clips, you can also use 38mm webbing clips.
You will also need 2 5mm x 38mm rods for the top handle if you want it to be able to swivel.
I have also allowed for 3 8mm diameter x 5mm thickness magnets in each ammo clip and compartment, if you want them to stay removable, but these are optional.
Please note - this is not an official replica, but I do always take care to be as accurate to in game models and references as I possibly can be! The in game model clips directly to the armour, so I took a little creative licensing and translated them as straps instead. If you do want to be as accurate as you can be, you could also use a 4 point harness under your armour and use 38mm nylon clips to clip directly to it!
EDIT: Uploaded NEW outershell top left and top right files to fix the handle insertion. Also uploaded the handle_Flat files, if you've already printed the outershell parts - it will be static but will save reprints.