Scott S

Cleats - Cleat based hanging system

by
ssouthur
Follow
Follow
Remix Model
ssouthur
ssouthur
|
Image 3 of 4
Cleats - Cleat based hanging system 3d model
ssouthur
ssouthur
|
Image 3 of 4
Cleats - Cleat based hanging system 3d model
2D
3D
Makes
Cleats - Cleat based hanging system 3d model
Cleats - Cleat based hanging system 3d model
Cleats - Cleat based hanging system 3d model
Cleats - Cleat based hanging system 3d model
This model is restricted by licensing terms. 

This system currently contains a shelf system, cups (e.g. Spice rack) and hooks. It also includes some useful tools to assist with the installation of the cleats.

See the PDF for a description of each of the components and how to install/print each. This collection of STL's contains the actual cleats. They are named as follows:

Cleat_<Type><Length><Holespacing>

The hole spacing refers to the maximum distance between the screw holes. The holes will be evenly spaced and the number of holes is determined by how long the cleat is combined with the maximum distance. For example with a 280mm long cleat, if the maximum distance between holes is 150mm then the cleat will have 3 holes and the spacing between those holes will be 130mm. The end holes are 10mm from the end - leaving 260mm.

Once you have your cleats you need accessories such as the Shelves, Cups or Hooks.


0 Likes0 DownloadsNovember 3, 2024


0 Likes0 DownloadsNovember 3, 2024
This model is restricted by licensing terms.