Mandalorian Dragonscale ARMOR - Star Wars - 3D print STL and multicolor 3MF file
byserev3d
Become a member on our Patreon and get access to DOZENS of awesome stl and 3mf files from our Serev3D library every month, for only 13$ (That's roughly 50 cents per file!)
More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/
For detailed printing & painting instructions, resources and extra info about this specific design: CLICK HERE
We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!
Also, a few good places where you can share your makes and get a good exposure:
Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d
- New models being released every 2-3 days
- If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List
PRINTING INSTRUCTIONS:
Each piece of the armor is conveniently cut into parts which fits on a medium size bed (250mmx250mmx250mm) 3d printer.
If you have a Bambu printer (or Orca slicer), you can load the 3mf project files with the recommended slicing settings. (If you're used to other settings with your machine, feel free to adjust the settings), we recommend to keep the orientation of each object the way it's being imported, the position minimizes the amounts of supports needed and keeps the layer lines not too visible.
- Layer Height: 0.2mm
- Infill: 10%
- Infill pattern: Gyroid
- Wall loops: 2 (if you want it stronger set it to 3)
Supports: Automatic Tree(organic) Supports, Threshold angle 30 degrees TopZ Distance: 0.2, BottomZ Distance: 0.2 (like this the supports can be removed easily, if your print might move or fail towards the beginning, adjust the amount to something lower like 0.15, it might be harder to remove the supports afterwards, but it will hold better while printing)
Brim: we recommend to use 5-10mm width outer brim for each element, since they are thin, the brim helps with the bed adhesion.
TOTAL estimated print time (Full chest plate, back plate and torso plate) : 30-34h
Individual estimated print times: each part takes around 4-5h to print.
For detailed assembly & painting instructions, resources and extra info about this specific design: CLICK HERE