tracking pixel
Mike S

Curing Platform for Anycubic Wash and Cure

by
scifiguy000
Follow
Follow
Remix Model
scifiguy000
scifiguy000
|
Image 1 of 5
Curing Platform for Anycubic Wash and Cure 3d model
scifiguy000
scifiguy000
|
Image 1 of 5
Curing Platform for Anycubic Wash and Cure 3d model
2D
3D
Makes
Curing Platform for Anycubic Wash and Cure 3d model
Curing Platform for Anycubic Wash and Cure 3d model
Curing Platform for Anycubic Wash and Cure 3d model
Curing Platform for Anycubic Wash and Cure 3d model
Curing Platform for Anycubic Wash and Cure 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4787089.

Brief description:

Curing platform expander (adds 1 inch to the diameter of the stock platform plus a short wall to prevent part from falling off if it moves), parabolic reflector, and raised platform (to allow simultaneous bottom side curing).

Purpose:

I've had many resin prints roll or vibrate off the stock Anycubic Wash and Cure rotating platform. Also, the stock platform is smaller than it needs to be (it can be 1 inch larger). So, I designed a simple drop in platform expander with a short retaining wall. I also wanted to cure the bottom of my prints without having to reorient the model for a second curing cycle, so I designed a raised platform and parabolic reflector to direct some UV to the bottom of the model.


0 Likes8 DownloadsOctober 18, 2021


0 Likes8 DownloadsOctober 18, 2021
This model is restricted by licensing terms.