tracking pixel
Pierre-Henri P

Crystal Dock Nintendo Switch Lite - Holoprops

by
Holoprops
Follow
Follow
Remix Model
qaatil2k16
qaatil2k16
Image 9 of 9
Crystal Dock Nintendo Switch Lite - Holoprops - printed in green pla on a Bambu P1S - 3d model
2D
3D
Makes
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops - Made it slightly smaller so I could use it for my phone. Dual coloured filament. - 3d model
Crystal Dock Nintendo Switch Lite - Holoprops 3d model
Crystal Dock Nintendo Switch Lite - Holoprops - printed in green pla on a Bambu P1S - 3d model
45 Likes47 DownloadsAugust 27, 2023


**Print-in-place No Support Needed For Switch Lite. **Check my designs for other consoles

Do you want a fantastic way to customize your Switch Lite? Here's the Nintendo Switch Lite Crystal Dock! Super easy to print in any color to go along with your TV setup!

The model was carefully designed to insert the Switch Lite like a glove. There is a convenient cable notch at the back to hold the official USB cable that comes with the Switch Lite. The USB port is easily reachable thanks to a large opening if you wish to charge the console while on the dock.

3D PRINTING SETTINGS To get the best out of the STL file, please follow these guidelines: • No support is needed to print this dock. Everything is Print-in-Place. • Layer Height 0.2mm • Nozzle 0.4mm • Recommended infill 15%. • Recommended Infill Pattern: Gyroid or Cubic

• Prepare and clean your bed for excellent adhesion. • Make sure your bed is correctly leveled. Then check again :D • Try to hide the seam and place it where nobody will pay attention. • Make sure your printing and bed temperatures are adequate for the filament you are about to use.


45 Likes47 DownloadsAugust 27, 2023




45 Likes47 DownloadsAugust 27, 2023