**Print-in-place
No Support Needed
For Switch Lite. **Check my designs for other consoles
Do you want a fantastic way to customize your Switch Lite?
Here's the Nintendo Switch Lite Crystal Dock!
Super easy to print in any color to go along with your TV setup!
The model was carefully designed to insert the Switch Lite like a glove. There is a convenient cable notch at the back to hold the official USB cable that comes with the Switch Lite.
The USB port is easily reachable thanks to a large opening if you wish to charge the console while on the dock.
3D PRINTING SETTINGS
To get the best out of the STL file, please follow these guidelines:
• No support is needed to print this dock. Everything is Print-in-Place.
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• Recommended Infill Pattern: Gyroid or Cubic
• Prepare and clean your bed for excellent adhesion.
• Make sure your bed is correctly leveled. Then check again :D
• Try to hide the seam and place it where nobody will pay attention.
• Make sure your printing and bed temperatures are adequate for the filament you are about to use.
