DVD Case Frame — Display Collection | Holoprops

After the Switch and Blu-ray launches, we're expanding the Display Collection to one of the most universal physical formats out there: standard DVD cases.

This frame is designed to turn your physical games and movies into clean, elegant wall displays you can swap instantly — depending on what you're playing, watching, or collecting.

---

📀 Compatible Cases

This DVD Case Frame works with:

• PlayStation 2 game cases
• Nintendo Wii & Wii U game cases
• Xbox & Xbox 360 game cases
• Standard DVD movies
• Old PC game cases (DVD format)

If it uses the classic standard DVD case format, it fits.

---

🖼️ Design

Clean rectangular frame with a neutral aesthetic that blends naturally into any gaming or movie setup - just like the rest of the Display Collection.

The Runestone variant frames are also included.

---

🧲 One Wall Mount. One System. Infinite Possibilities.

The DVD Frames use the exact same Wall Mount as the Switch Frames and the Blu-ray Frames.

• ✅ No new mounting system needed
• ✅ One Wall Mount works across the entire Display Collection
• ✅ Mix Switch, Blu-ray, and DVD frames on the same wall seamlessly

If you already printed the Wall Mount, you're fully compatible.

New to the collection? The Wall Mount and Wall Guide are included for free.

---

🔩 Wall Installation

• 2 screws
• Drywall → use anchors
• Wood studs → use wood screws

A drilling template is included so everything stays perfectly aligned and level.

Inside each Wall Mount, glue 2 round magnets: 10 mm × 3 mm.

---

⚠️ Polarity Rules - Read This

• Both magnets inside the Wall Mount must be glued with the same polarity
• Every Wall Mount on your wall must follow the same direction
• The rear magnets of every frame must match that polarity

This is what makes instant swapping possible across your entire wall without thinking.

---

🧲 Magnets Per Frame

Each DVD Frame includes:

Position Purpose Size 2 rear magnets Wall mounting 10 mm × 3 mm 1 corner magnet Future badges & accessories 10 mm × 3 mm

Installation:

1. Apply a small drop of super glue
2. Press firmly into place
3. Let fully cure before mounting

We personally use a super glue accelerator - the bond sets in seconds.

⚠️ Polarity matters. Incorrect installation means frames and badges will not attach properly.

---

🖐️ One-Second Removal

1. Grab from the bottom
2. Gently pull toward you

The frame detaches naturally — no force needed.

---

🧠 3MF Files — Plug & Play

Every slicer setting is pre-configured: infill, speed, bridges, seams, supports, and more. Hours of testing go into each file so you get a true out-of-the-box experience.

Optimized for: Bambu Studio · Orca Slicer · Prusa Slicer

Other slicers may break alignment, supports, colors, or custom settings.

---

🎨 Print Settings Setting Value Nozzle 0.4 mm Layer Height 0.2 mm Infill Hatch 8% or Cubic 15% Supports Yes — pre-calibrated in 3MF Walls 2

---

🎨 Filaments

All filaments from the Bambu Lab Store — mostly from the PLA Metal lineup.

---

💬 Join the Community

Share your prints and connect with other builders on the Holoprops Discord.

---

📜 Licensing

All Holoprops models are 100% original creations, hand-sculpted with care and creativity. Protected intellectual property.

Personal use only. For commercial printing rights, join the Merchant Tier on Thangs.