Hybrid lamp that can be used as a lamp shade but also as a table lamp, it is compatible with E27, E26 and with reduction also E14 bulbs. When using a bulb with a clear diffuser, it casts sharper shadows above the shade and below the shade that resemble the sun.
Bulb socket for this lamp is sold in almost every shop around the world. You can use E26/E27 full thread sockets like this - E26/E27 SOCKET or E14 full thread like this - E14 SOCKET
Base is designed for 5mm diameter cable on picture I use 6.2mm diameter. JUTA cable
The diameter of the hole in the lampshade is 42mm. Dimensions lamp shade - 200x164x164 biggest variant - 254x164x164
Use only Led bulbs or print your lamp from more temperature resistant materials, I used PLA, works great with my 10W LED bulb.
Maximum bulb size is G125/125mm diameter.
3D PRINTING SETTINGS
Everything is printed with 0.4 nozzle, 0.2 layer height, no support need.
Lampshade - I change only outer wall width from 0.42 to 0.46mm
Project includes my printing profiles from ORCASLICER for Bambulab X1C or P1S.
SHADE 0.2 layer height Outer wall width from 0.42 to 0.46mm Seam position - Aligned Walls printing order - Inner/Outer
BASE 0.2 layer height Seam position - Aligned Wall generator - Classic Walls printing order - Inner/Outer/Inner Wall loops - 2 Infill - 10% Gyroid Ironing - Topmost surface only No-brim
Socket nuts/reduction 0.2 layer height you can go lower but for me is fine Seam position - Random Wall generator - Arachane Wall loops - 4
SocketCap 0.2 layer height Seam position - Aligned Wall generator - Arachane Wall loops - 4 USE BRIM - I use 8mm outer and inner
Base securing nut Seam position - Aligned Wall generator - Arachane Wall loops - 4 NO BRIM
Use only Led bulbs or print your lamp from more temperature resistant materials, I used PLA, works great with my 10W LED bulb.
If you want see my slicing settings open my Orca projects.