Chikorita
This Pokeball is perfect for the start.
Print Difficulty: Medium
It's a complete multipart design, allowing you to achieve multicolor printing even with just a single extruder printer. 💪
🧾 Inside the file, you'll find:
✅ The complete model
✅ The multipart model
✅ Essential support information
✅ All files are labeled by color.
✅ All pieces are set in the correct print orientation.
🖨️ If you require additional printer settings, here they are:
📏 Layer lines: 0.2 mm
In my videos/photos, I typically print at a layer height of 0.1 - 0.2.
For intricate parts and accessories, I use a 0.1 layer height.
For the shells and the middle part, I opt for a 0.2 layer height.
⭕ Walls: 3 walls
✳️ Infill: 5-10%
🚄 Speed: 45 mm/s
🌡️ Temperature: 200-220°C nozzle and 60°C bed
🛠️ Support: Information for each part is included in the filename.
🌌 Raft/Brim: If you're working with very small parts without support, I recommend using adhesive when your adhesion isn't that strong.
Assemble Videos: https://www.tiktok.com/@pokeball.empire?_t=8g6K2gkhAoL&_r=1
Feel free to share your Makes and showcase your unique creations and variations. 🤩
For more models or a commercial license, please visit my Patreon page.