Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4540352.

I created this to allow for better display of the QMX (and other) magnetic backed Star Trek Cosplay badges/commbadges.

You will need to print 2 of the Stand Legs.

You can use this for pins with points/frogs but you will need to test place them and then use a small hand drill or Dremel tool to perforate the stand to allow the pins to push through and be secured with frogs.

Let me know if you would like to see other sizes.

UPDATE-01-22-2022:

Included a new STL file that has the two (2) legs and one (1) body for a complete stand, oriented correctly for print.  Hopefully this will make it easier for folks looking to print a stand.
 

Star Trek Magnetic Pin Stand (QMX)

Stand_Body.stl

Stand_Leg.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3140183.

Based on a question about making a prop stand for the Original Series Tricorder I decided to move this one up in my work queue.

The stand should be centered on the Tricoder prop width wise.  There will be some of the prop that hangs over on each side and is by design given the shape of the bottom of the prop from Diam Select and others like Master Replicas.

You should be able to have the lower compartment door open with the upper compartment door resting on it.  Please message me if you find that isn't uniformly true and I will mod this (just be sure to send me some images of the where your prop is catching on the raised edge of the stand.

I included a slot on the back to roll up the strap and have it rest behind the prop.  Just an option so if you prefer to have the strap loose by all means do so.

If you are displaying one of the heavier replicas like those produced by Master Replicas you may wish to bump up the infill to 30%.  I printed it at 15% for the Diamond Select toy version and it was well balanced and had no issues.

Star Trek The Original Series Tricorder Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3998664.

I decided to try my hand at building a working clock for a friend who wanted to gift it to someone they were going to visit.

All credit to Vector Design Store UA on Etsy for the SVG. I highly recommend them if you want to build any vector based 3d prints or laser cut designs:

https://www.etsy.com/listing/617303039/millenium-falcon-clock-filemillenium?ga_search_query=falcon&ref=shop_items_search_1&crt=1

I used the Vosarea Silent Quartz Wall Clock kit from Amazon for the clock hardware - usually runs about $10.00:

https://www.amazon.com/gp/product/B07RWV3G53/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

I printed this in two colors of filament using my Prusa i3 MK3S and use the filament split in Prusa Slicer to print the top 3 layers in White Amazon Basics filament.  All lower layers in Prusament Galaxy Black.

I used an M9 threading tool to put threads in the center hole which the clock hardware screwed into perfectly.



Millenium Falcon Clock

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pdj

Achievements

Voyager

Seedling