Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4547764.

This is my watch Holder. You can print more stands, and stack em up.

The cap needs supports, or you can try printing it downside

The holder may need supports over 75 degrees, according to your printer. Its mostly hanging around 45 degrees, almost any printer can do it without support. 

There are 2 holder files one with 6cm separation between watches, and another with 5cm

The metal watchs are fitted for my wrist. The holder can bend to smaller wrists, or you can cut the tail of the hanger for even smaller watches.

I used PETG on the holder for bending and resistance. 

Watch Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4791734.

Hi!

I saw this somewhere and liked it, so made mine. You can manage this tweezers as a extra fingers while using your hand in something else. For like when you want that snack but you dont want to dirt your fingers while playing something.

There is a ruggedized and a flat version. Flat works better for small things

Hope it works for you

Snack Tweezers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5110542.

I made a CardHolder for virus Game. It was created to fix the Virus and Virus2 combined set of cards. It has also the Halloween expansion. 

You can play on it, and store the virus sleeved cards. Fits the Virus2 game box, or can be used alone. You can store other card games about the same size or even escale the model to your needs. 

Has 3 covers: One long, 2 short (one with the Virus Logo).

Hope you enjoy

Virus Card Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4588875.

This is my Question Mark box for Nintendo Switch game game cartridges.

It holds up to 15 games, and 2 microSD. 

The box and the ornaments are in separate files to try your own color combinations

Feel free to sugest improvements to the design and send some tip if you want. 

Tks

So far, no supports needed.

* having trouble uploading the rest of the files... just doesnt load

Mario Cube Switch Game Case, Foldable Print in Place

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3510477.

Another Cel holder for the Prius. well I made a file without the brand. 0.2 or smaller definition is adviced for the flying layers in the front. 

PLA printing might be compromised in the heat of the car in the sun. My model shrunk

Celphone Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5045920.

My kid has to take care of an egg at school and asked me to make a feet for it. I designed this little feet for the egg to stand, among us style. Works better for the egg upside down (less wide side).

A version with and without backpack

Egg boot feet (among us style)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3269973.

This is my first design. Be gentle.

The original ring its 3.2 mm high, and the V2 its 1.9mm and more rounded. The original may need some sanding for better twist of the stand.

The stand has 10 HP units, and space for up to 3 coins (1HP) with a assumed value of 10 HP. The V2 has slots for better standing of those coins.



Gloomhaven stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4615767.

Hi... I made an insert for all the pieces of the Castles of Burgundy 20th Ed

It has now a lid if you store your games vertically of if you just want to look nicer



Insert: Castles of Burgundy 20th Ed

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4544867.

This is my dispenser for pet bags.

The cover needs supports on overhangs over 75%.

There are separate files for you to select color combinations.



Pet bag dispenser

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5405675.

This is my mexican train dominoes play tray. It holds 10 players plus public train, 11 spaces. You can pause your print to change filament at the layer of the train tracks begins to print from cura.

Mexican Train Dominoes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3375059.

I needed a set of tweezers, and this liked me. But i needed a little bit longer for cleaning under the bed. So rezised in lenght, and cut some body for a slimer grip arms. Tks to the autor.

Longer tweezers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3395780.

This is a Stand for the Role tiles. You can add the coins to the base.

I Made a 2nd version of the base, more stable and detailed.

Puerto Rico stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3517329.

Hi! Just made my adapter for webcam. Designed for the CR10sPRO to lock in the Z post. Will lock with other printers with the same space on the rails. It can turn 360°. 

You can load your GoPRO or a logitech cam with the included adapter.

You can put the mount on the top of the Z axis with the included adapter.

CR10sPRO GoPRO adapter, with optional Logitech C170 mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5019579.

This is my version of the nemesis card holder. It fits sleeved cards. Has space for discard objects pile, and 3 big card deck (event, intruder and wound in this example). Also has 2 slots for pieces, like fire and damaged room. 

This print was made without layers on top and bottom, 20% infill. This is faster and pla saving. Thats why the visible infill mesh

Nemesis card Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027967.

Here is my version of the character board of TWOM. Has a large space for sleeved card, and has space for the 10 status tokens and cover for them for storage. Hope it helps your setup for the game. 

Te cover mesh effect is done without top and bottom layers, is fast and saves time.

This War of Mine - character base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4975504.

I made a tool holder for a few frequently used tools in 3d printing. It mounts on the top of the z-axis arch, and can fit any printer with the same 20mm arch. Can hold a few things, its small and handy. Hope it works for you as did for me.

CR10sPRO tool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027970.

This is my filament guide. It requires a 20mm bearing and enhances stability of the Z screw.

Filament guide CR10S Pro

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4983331.

You can Hang your wifi remote with this stand and allows to aim the IR beam to your devices

Lloyd Wifi Remote Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4647811.

Just a holder for this Chinese electric Screwdriver, with room for a few screws, a few tips out the holder, and the magnetizer

IFU electric Screwdriver Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4983320.

This is my back scratcher for relief at the back. enjoy

Back scratcher

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4488983.

This is my battery holder. It holds up to 8 9V batteries (even in sets of 4 with protective plastic), 18 AAA batteries and 14 AA batteries. Hope fits your needs

Battery holder (AA AAA & 9v)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

palafox

Achievements

Seedling

Debutant