The Legend of Zelda: A Link to the Past (SNES) Cover - HueForge

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

The Model is 200x132.67mm in size

You may print at higher layer heights below the Min Depth of 0.5mm

The Max Depth is 3mm and the Actual Depth is 2.3mm

This print uses 3 unique filaments

Swap Instructions:    Start with Black    At layer #7 (0.8mm) swap to Red    At layer #11 (1.2mm) swap to Gold for the rest.