Metal Gear Revengence - HueForge/Wall Art/Lithophane

used my bamoo labs a1 ams light but you dont need a ams to make this

Start with Black At layer #8 (0.72mm) swap to second color - any Gray At layer #13 (1.12mm) swap to third color - any Blue At layer #17 (1.44mm) swap to fourth color - any White for the rest.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.61mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3mm and the Actual Depth is 1.8mm