0 Likes1 DownloadsAugust 29, 2024
I used bronze instead of gold but still looks decent
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.5mm The Max Depth is 2.3mm and the Actual Depth is 1.4mm
Swap Instructions: Start with Black At layer #7 (0.8mm) swap to Gold for the rest.
0 Likes1 DownloadsAugust 29, 2024
0 Likes1 DownloadsAugust 29, 2024