Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3255941.
I am a huge fan of the wonderful Bear upgrade to the Prusa MK3/MK2 printers from user pekcitron ( https://www.thingiverse.com/thing:2808408 ). I recently built an enclosure to house my Full Bear MK3 and wanted some additional cable clips to secure the LCD cables to the enclosure. In addition, I always felt that the ziptie cable clip that is included in the Bear parts would be better if the ziptie orientation was perpendicular so that the ziptie could more naturally hold cables oriented parallel to the extrusions.
This design includes source and STL for the following 5 cable clips:
- LCD cable clip with magnetic mount (two versions, one with magnet underneath, one with the magnet to the side).
- LCD cable clip with screw-down mount (two versions, one with the screw hole in front/behind the clip, one with it to the side).
- A cable clip that mounts into a 4020 or 2020 extrusion and which holds a ziptie.
All 5 are remixes starting with a design from pekcitron's cable clips. As always, Fusion 360 source is provided if you would like to customize these for your needs.
The cable clips with magnet mounts were designed for these magnets, but Fusion 360 source is provided if you would like to customize for a different magnet size:
https://www.michaels.com/promag-neodymium-magnets/10413548.html
EDIT: 2018-12-10
Added an alternative version of the ziptie mount. This version sits a bit more flush to the v-slot, while also providing a better surface to grip when you install it.