Very quick adaptation of my previous [model](https://www.thingiverse.com/thing:3104869) from 2018. 

This is a holster for glue guns for a multiboard. Both my Stanley GR25 and Arrow TR400 fit well in it.

It uses the small threads of the multiboard and I suggest the [13 mm Small Thread, Plain Head, T-Bolt](https://thangs.com/designer/Keep%20Making/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236) to fix it to the board.

This one can be printed using the mounting flat side directly on the bed without support.

Multiboard glue gun holster

Holster.stl

Very quick remix of this pegboard bracket [model](https://www.thingiverse.com/thing:6222539) for the Amazon Echo Gen 3

It uses the small threads of the multiboard and I suggest the [9 mm Small Thread, Flat Head, T-Bolt](https://than.gs/m/973894) to fix it to ot.

This can be printed without support.

Multiboard Amazon Echo Gen 3 bracket

Echo_Holder_v3_multiboard.stl

This is a a 4x4 module that holds 16 SFP modules.  It is a rehash of my older [SFP tray](https://www.thingiverse.com/thing:3753820)

It can attach to a multiboard using a **Multipoint Attachement** such as:
- [Flush big thread multipoint](https://thangs.com/designer/Multiboard/3d-model/Flush%20Big%20Thread%20-%20Multipoint-1123331)
- [Small thread multipoint](https://thangs.com/designer/Multiboard/3d-model/Small%20Thread%20-%20Multipoint-1123334)
 
They will fit nicely side by side on the multiboard to make a continuous holder

It can also be used as a standalone tray.

**UPDATE**. v2 has the multipoint rails on the side to stabilize them when on an horizontal row.  I will probably create a topper to put in a standard bin eventually.

Print it with the face flat on the bed without any support.

Multiboard SFP / GBIC modules holder

Multiboard GBIC Holder.stl

This is a mount for the Brother P-Touch D610BT

It uses the small threads of the multiboard and I suggest the [13 mm Small Thread, Plain Head, Shank T-Bolt](https://thangs.com/designer/Multiboard/3d-model/13%20mm%20Small%20Thread%2C%20Plain%20Head%2C%20Shank%20T-Bolt-974107) to fix it to the board.

This one can be printed using the back side directly on the bed without support (as shown on picture).

Also included separately is a sidecar that will try to catch the labels.  It mostly works, design could be improved.  It's easy to just pop a new module on the side using the 2 pegs.  The side car needs support to print.

You insert the device either by pushing forward on it, there is a bit of resistance because of the left side clip.  but the clip will bend and pop into place.  
It's also easier to insert it from the right side to left while pushing on it.  It's easier and the clip doesn't need to bend.

Multiboard Brother P-Touch D610BT wallmount

Sidecar V1.stl

Multiboard Brother P-Touch610BT Wallmount.stl

IT Professional.  Thinkerer by nature...

Thingiverse: https://www.thingiverse.com/mmasson/designs

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mmasson

Achievements

Seedling

Voyager

Debutant