This is a rough remix of this [model](https://www.printables.com/model/1028132-remix-unifi-flex-mini-25g-5port-usw-flex-mini-25g).
I rearranged the screws holes to accomodate for the multiboard spacing and standard screws.

It uses the small threads of the multiboard and I suggest the [9 mm Small Thread, Flat Head, T-Bolt](https://thangs.com/designer/Multiboard/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20Shank%20T-Bolt-974207) to fix it to it.

This can be printed without support.

Multiboard Unifi Flex Mini 2.5G 5Port USW-Flex-Mini-2.5G-5 bracket

Flex_mini_2.stl

This is a Double DIN adapter to fit a 7in radio in a 9in hole.

I changed the radio in the car, I ordered the wrong radio/fascia combination.  I had a 7in ATOTO radio and a 9in dash kit from Aliexpress.  I didn't want to resend the items so here's a neat adapter. 

I don't know if it can apply to any other combination of radio/fascia but here it is nonetheless.

INSTALLATION:  Put 5x M3 nuts in the captive holes and use short M3 screws to attach the adapter to the dashkit.  Align the front of the radio to the adapter and use the screws provided by the radio to fix the radio to the adapter using the side rails.

**Radio:**
[ATOTO F7](https://www.amazon.ca/ATOTO-Android-Navigation-Stereo-Bluetooth/dp/B07GMMY1QV?ref_=ast_sto_dp)

**Dashkit:**
[FORD FOCUS 2012-2019 9 Inch Stereo Dvd Player Dashboard Kit Face Plate 9 INCH Car Radio Fascia](https://www.aliexpress.com/item/1005005196481306.html?spm=a2g0o.order_list.order_list_main.5.390d1802IzkaCO)

7in to 9in double DIN adapter

7inTO9inDoubleDIN.stl

This is a mount for the Brother P-Touch D610BT

It uses the small threads of the multiboard and I suggest the [13 mm Small Thread, Plain Head, Shank T-Bolt](https://thangs.com/designer/Multiboard/3d-model/13%20mm%20Small%20Thread%2C%20Plain%20Head%2C%20Shank%20T-Bolt-974107) to fix it to the board.

This one can be printed using the back side directly on the bed without support (as shown on picture).

Also included separately is a sidecar that will try to catch the labels.  It mostly works, design could be improved.  It's easy to just pop a new module on the side using the 2 pegs.  The side car needs support to print.

You insert the device either by pushing forward on it, there is a bit of resistance because of the left side clip.  but the clip will bend and pop into place.  
It's also easier to insert it from the right side to left while pushing on it.  It's easier and the clip doesn't need to bend.

Multiboard Brother P-Touch D610BT wallmount

Multiboard Brother P-Touch610BT Wallmount.stl

This is a a 4x4 module that holds 16 SFP modules.  It is a rehash of my older [SFP tray](https://www.thingiverse.com/thing:3753820)

It can attach to a multiboard using a **Multipoint Attachement** such as:
- [Flush big thread multipoint](https://thangs.com/designer/Multiboard/3d-model/Flush%20Big%20Thread%20-%20Multipoint-1123331)
- [Small thread multipoint](https://thangs.com/designer/Multiboard/3d-model/Small%20Thread%20-%20Multipoint-1123334)
 
They will fit nicely side by side on the multiboard to make a continuous holder

It can also be used as a standalone tray.

**UPDATE**. v2 has the multipoint rails on the side to stabilize them when on an horizontal row.  I will probably create a topper to put in a standard bin eventually.

Print it with the face flat on the bed without any support.

Multiboard SFP / GBIC modules holder

Multiboard GBIC Holder.stl

Very quick remix of this pegboard bracket [model](https://www.thingiverse.com/thing:6222539) for the Amazon Echo Gen 3

It uses the small threads of the multiboard and I suggest the [9 mm Small Thread, Flat Head, T-Bolt](https://than.gs/m/973894) to fix it to ot.

This can be printed without support.

Multiboard Amazon Echo Gen 3 bracket

Echo_Holder_v3_multiboard.stl

Very quick adaptation of my previous [model](https://www.thingiverse.com/thing:3104869) from 2018. 

This is a holster for glue guns for a multiboard. Both my Stanley GR25 and Arrow TR400 fit well in it.

It uses the small threads of the multiboard and I suggest the [13 mm Small Thread, Plain Head, T-Bolt](https://thangs.com/designer/Keep%20Making/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236) to fix it to the board.

This one can be printed using the mounting flat side directly on the bed without support.

Multiboard glue gun holster

Holster.stl

This is a multiboard version of the "Wall mount for DeWalt DCS356 Oscillating Tool" on printables.com.  It is inspired by this [model](https://www.printables.com/model/253565).

It screws in the multiboard using small threads.  I use 9mm Small Thread, Flat Head, T-Bolts.


Multiboard DeWALT DCS356 Bracket

Multiboard DeWALT DCS356 Bracket.stl

These are pegs to allow hanging items using keyholes hangers.

They screw in small threads such as the peg holes in the multiboard.
Just align them with the keyholes by screwing or unscrewing them, you should be able to match all the spacing distances.

Using the same principle as the T-Bolts, they print flat without support so they are very sturdy.  I print them with 100% infill.

They come in multiple sizes:
- 3mm diameter & 3mm length shaft / 7mm diameter button
- 3mm diameter & 6mm length shaft / 7mm diameter button

I can generate more sizes (just ask), but these where the sizes I needed to hang a phone and a switch on my multiboard.

Multiboard Keyhole Hangers Pegs

Multiboard Keyhole Peg r3 x l6 x b7.stl

This is the spool that goes with the [Spool Holder](https://thangs.com/designer/mmasson/3d-model/Mulitboard%20-%20Wire%20Spool%20Holder-1058182).

I didn't like having the edge of the spool glued or friction fitted in the original [model](https://www.thingiverse.com/thing:4610854/files).  I redesigned the spool with threads now you just screw the parts together and it stays firmly in place.

The tolerances have been adjusted and the spool/pins should fit together without too much pain.

You can use a coin or a screwdriver for the pins, but be careful it's still small plastic parts and can break.

Threaded spool for Wire Spool Holder

Spool_Pin.stl

Spool_Negative.stl

Spool_Positive.stl

This is a multiboard version of the modular wire spool holder.  It is inspired by this [model](https://www.thingiverse.com/thing:6436167).

It snaps in the multiboard using Push-Fits.  You need to have a Multiboard Snap to attach it to the board: https://www.multiboard.io/parts-library/snaps

It needs supports for the push-fit in the back only.  There is a builtin support that needs to be cut with an exacto knife in the front wire slot.

It is compatible with the original spools from the original model, but you can also use my redesigned threaded spools to go with it.  It is a redesign to remove the need for screws or glue.

https://thangs.com/designer/mmasson/3d-model/Threaded%20spool%20for%20Wire%20Spool%20Holder-1058186

Mulitboard - Wire Spool Holder

Mulitboard - Wire Spool Holder.stl

Sidecar V1.stl

IT Professional.  Thinkerer by nature...

Thingiverse: https://www.thingiverse.com/mmasson/designs

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mmasson

Achievements

Seedling

Voyager

Debutant

Pinned models

Multiboard glue gun holster

Multiboard Amazon Echo Gen 3 bracket

Multiboard SFP / GBIC modules holder

Multiboard Brother P-Touch D610BT wallmount

Multiboard Unifi Flex Mini 2.5G 5Port USW-Flex-Mini-2.5G-5 bracket

7in to 9in double DIN adapter

Multiboard Brother P-Touch D610BT wallmount

Multiboard SFP / GBIC modules holder

Multiboard Amazon Echo Gen 3 bracket

Multiboard glue gun holster

Multiboard DeWALT DCS356 Bracket

Multiboard Keyhole Hangers Pegs

Threaded spool for Wire Spool Holder

Mulitboard - Wire Spool Holder