LSR II Model

This is a model of a BD LSR II Flow Cytometer. My goal was to make a realistic and detailed model, not a perfect recreation, so there are some dimensional differences and such.

I've uploaded two versions, one fully detailed model and another simplified version. The simplified version is intended to be printed on a smaller scale on an FDM printer, as they will struggle to accurately print the finer detail of the fully detailed model. There is also one model for the feet of the printer which can be attached post-printing, you will need (4) total.

Also, .f3d of the models are included if you wish to tinker with them!

Print Settings:

• 0.4mm Nozzle
• 0.2mm layer height (0.1mm if printing a version smaller than approx. 6")
• Supports necessary
• Brims on Feet