A coffee knock box to tap your espresso grounds into - in the shape of a kirby

Scale to size
Print with organic supports
Make sure to seal it if using for coffee - I used enamel spray paint

Coffee Knock Box - Kirby

kirby_06.stl

A tamagotchi for your apple watch! You need to use 4 magnets (8mmx3mm) to snap it together. I have included a screenshot of how I lay them out to print for easiest results!

Here is a video of me demonstrating how it works! https://www.tiktok.com/@lucythemaker/video/7352345826355596560

Print Settings
Material: PLA
Layer Height: 0.2mm
Supports: tree / organic
Infill: 10%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖

My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker



Apple watch Tamagotchi Case - 44mm

tamagotchi_44mm_15_tamagotchi.stl

A hypnotic fidget toy as seen on @lucythemaker's tiktok. Concentric stars that look cool when you move it around your desk


**Print Settings**
Material: PLA
Layer Height: 0.2mm
Supports: NONE
Infill: 15%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖

 

**My socials:**
Tiktok - https://www.tiktok.com/@lucythemaker 
Youtube - https://www.youtube.com/@lucythemaker 
Instagram - https://instagram.com/lucythemaker


Inspired by Circle Fidget by @blarg42_443374 and Fractal Fidget Star created by chuuckaduuck.



Hypnotic Star Fidget Toy

concentricFidget_star_01.stl

A hypnotic fidget toy as seen on @lucythemaker's tiktok. Concentric squares that look cool when you move it around

10cm across

**Print Settings**
Material: PLA
Layer Height: 0.2mm
Supports: NONE
Infill: 15%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖

**My socials:**
Tiktok - https://www.tiktok.com/@lucythemaker 
Youtube - https://www.youtube.com/@lucythemaker 
Instagram - https://instagram.com/lucythemaker


Inspired by Circle Fidget by @blarg42_443374 and Fractal Fidget Star created by chuuckaduuck.

Hypnotic Square Fidget toy

concentricFidget_square_03.stl

A hypnotic fidget toy as seen on @lucythemaker's tiktok. Concentric triangles that look cool when you move it around

**Print Settings**
Material: PLA
Layer Height: 0.2mm
Supports: NONE
Infill: 15%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖

**My socials:**
Tiktok - https://www.tiktok.com/@lucythemaker 
Youtube - https://www.youtube.com/@lucythemaker 
Instagram - https://instagram.com/lucythemaker


Inspired by Circle Fidget by @blarg42_443374 and Fractal Fidget Star created by chuuckaduuck.

Hypnotic Triangle Fidget toy

concentricFidget_triangle_01.stl

A hypnotic fidget toy as seen on @lucythemaker's tiktok

***

**Print Settings**
Material: PLA
Layer Height: 0.2mm
Supports: NONE
Infill: 15%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖

***

**My socials:**
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker

***

Inspired by Circle Fidget by @blarg42_443374 and Fractal Fidget Star by chuuckaduuck.


Evil Eye Concentric Circles Fidget Toy

concentricFidgetEye_03.stl

A tamagotchi for your apple watch! You need to use 4x 8mmx3mm magnets to snap it together. I have included a screenshot of how I lay them out to print for easiest results!

Here is a video of me demonstrating how it works! https://www.tiktok.com/@lucythemaker/video/7352345826355596560



Print Settings
Material: PLA
Layer Height: 0.2mm
Supports: tree / organic
Infill: 15%
Fill Pattern: Gyroid
Brim: no

Make sure to tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
I’d love to see pics of your prints below! 💖


My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker





Apple watch Tamagotchi Case - 41mm

tamagotchi_26_41mmbutton_turner_print.stl

Keycap of a dice for a mechanical keyboard. Fits cherry switches. Showing the number 5

Prints without supports

PLA
0.1mm Quality
NO SUPPORTS
Brim
See images for screenshot of my settings


Please tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
Please leave pics of your prints below! 💖


My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker





Dice Keycap - 5 face

dice_5_short_06.stl

Keycap of Jojo Siwa Karma outfit

Paint on supports for ears. Make sure to not have supports for switch cross in the middle! Its too small to take out easily. Prints without supports

PLA
0.1mm Quality
Paint on supports - tree supports for ears ONLY (could probably try with no supports at all, but I havent yet)
Brim
See images for screenshot of my settings

Please tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
Please leave pics of your prints below! 💖


My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker





Jojo Siwa Keycap

jojo_03.stl

Miniature book box! Print in place, hinges open.
5cm tall, 3cm wide

I am iterating on this project until I get a great print in place set of books for my mini bookshelf! I will continually update these models so you can join in too :D

PLA
tree supports
0.2mm QUALITY
printed on a prusa MK3S+

Miniature Book Box [Draft]

bookbox_05.stl

A bratz boot that holds your lipgloss!

I'm going to be iterating more on this one this week :D

Print standing up
PLA
0.2mm QUALITY
tree supports

Please tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!
Please leave pics of your prints below! 💖


My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker





Bratz boot

bratz_boot_04.stl

A cowboy boot keychain that will hold a tube of aquaphor!

See my profile for other boot versions <3

Please tag @lucythemaker in any content you create with this model
If you list it on your store please link back to @lucythemaker as well, and leave a comment here or on socials so I can repost!

Print Upright (sole down)
Tree supports
0.2mm QUALITY
infill 15%
PLA

Please leave pics of your prints below! 💖


My socials:
Tiktok - https://www.tiktok.com/@lucythemaker
Youtube - https://www.youtube.com/@lucythemaker
Instagram - https://instagram.com/lucythemaker





Cowboy Boot Keychain - Spur

woody_boot_05boot.stl

boot_spur_02_spur_wheel.stl

boot_spur_02_spur_joint_2_print.stl

boot_spur_02_spur_strap.stl

woody_boot_04_Heart.stl

Cowboy Boot Keyring - Straps

woody_boot_08.stl

Cowboy Boot - simple

woody_boot_10.stl

This is a tamagotchi style egg that you can wear on your wrist. 

It fits an apple watch series 9 41mm model. I would love to support all watch sizes, please comment if you have a different size and I can make a test print to check if I have the measurements right and upload a variant for you!

Use a small piece of double sided sticky tape on the star button for the apple watch wheel if you want to be able to turn the wheel as well as press.

Feel free to sell your prints on your shop, but be sure you tag me in any videos/store listings!

Tree supports, screenshot of how I print it attached.
0.2mm QUALITY
PLA
5% infill

Tamagotchi case for Apple Watch - with strap

tamagotchi_24_41mm_wrist_itamagotchi.stl

A Cowboy Hat cover for your blistex tub. With a hole to make it into a keyring.

As blistex tubs vary slightly in size, for best results use a small piece of double sided tape on the base of each part before putting the tub in. This will give it the added friction needed while still allowing you to remove the tub when its empty!
If you have trouble removing the tub, heating up with a heat gun or hairdryer slightly should make it easier to get out! (Dont heat it up too much or it'll melt!)

Please leave pics of your prints below! 💖

My socials:
[Tiktok](https://www.tiktok.com/@lucythemaker)
[Youtube](https://www.youtube.com/@lucythemaker)
[Instagram](https://instagram.com/lucythemaker)

cowboy_hat_blistex_keyring.stl

cowboy_hat_15_Hat_bottom.stl

This tier gives you **unlimited access** to my full catalog! You will also have access to all my **new designs** as I post them. If you are an active member of this subscription tier, you also get commercial rights to **sell** these designs in your shop! Make sure to post your shop in the comments of my builds so I can share with my followers on socials!

**What you get with this tier**

1) Instant Access
As a new member you unlock instant access to the entire catalog

2) Commercial License
With active subscription, you have a commercial license to sell 3D prints from LucyTheMaker's Catalog.

3) Access to Future Designs
Active Members get free access to every new design released!

***

By signing up to the $10/month tier, you acknowledge and agree to all terms stated above. Any shop(s) or person(s) who break these terms of agreement will be held legally accountable

lucythemaker

Achievements

Seedling

Debutant

Pinned models

Tamagotchi case for Apple Watch - with strap

Apple watch Tamagotchi Case - 41mm

Coffee Knock Box - Kirby

Apple watch Tamagotchi Case - 44mm

Hypnotic Star Fidget Toy

Hypnotic Square Fidget toy

Hypnotic Triangle Fidget toy

Evil Eye Concentric Circles Fidget Toy

Apple watch Tamagotchi Case - 41mm

Dice Keycap - 5 face

Jojo Siwa Keycap

Miniature Book Box [Draft]

Bratz boot

Cowboy Boot Keychain - Spur

Cowboy Boot Keyring - Straps

Cowboy Boot - simple

Tamagotchi case for Apple Watch - with strap

cowboy_hat_blistex_keyring.stl