This collapsible and adjustable playing card holder allows single-handed play for those with only the use of a single hand and convenience for others. The holder is about 1/4” thick when folded. It gently holds the cards so they will not fall out even when flipped over. Cards can be inserted and removed singularly or in multiples. The viewing angle adjusts based on the position of the back leg.
This version will hold up to 10 cards. I have posted a more compact smaller version for 6 cards which is available here... https://than.gs/m/1158489
I have included gripper feet (print 4) that should be printed in TPU if you want them. They are optional but do help to reduce sliding on smooth surfaces 100% printed - no hardware, fasteners, or adhesives required. No additional support is required.
Print Settings:
Material = PLA or PETG (any material should work) Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = minimum 2 (0.8mm) Top and Bottom Layer Count = minimum 3 Infill = 100%, or minimum 40% Cubic Ironing = Not required Brim = No Support = No
Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.
See my blog for more details and other product info… https://www.logicalplanet.com/