This is a simple handy kitchen tool for stripping herbs off their stems. Now I know…. you do not need a tool for this, you can just use your fingers. But if you are doing a volume of stems, you will definitely appreciate this tool.
This is a very effective tool for most garden herbs. I love to dry my garden herbs for the winter and this tool makes that a lot easier. This is a print-in-place compliant design that prints easily with no support and is useable right off the print bed. Just be sure to use a food-safe material.
I included a range of hole sizes to hopefully accommodate whatever herbs anyone needs to process. But if you find you need a different size please let me know.
100% printed - no hardware, fasteners, or adhesives required. No support is required.
Free for a limited time. Please collect it, like it and download it now to help support me in the league competitions. Thank you.
Print Settings:
Material = Food grade PETG, any material should work.
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Infill = minimum 40% Cubic
Ironing = Not required
Brim = No
Support = No
Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.
I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.
See my blog for more details and other product info… https://www.logicalplanet.com/