H2 Series Waste Bin Bambu Lab H2D / H2S / H2C

The H2D's waste chute dumps purged filament straight down the back of the machine with nowhere to go. This waste bin mounts directly to the back of the printer and catches it cleanly — no mess on your shelf, no hunting for bits on the floor.

Single piece print, no support required. Attaches magnetically so it's easy to remove and empty.

Like all of my H2 Series and exhaust components, this is free. My contribution to the 3D printing community.

Note: Designed and tested on the H2D. The H2S and H2C share the same printer framework and should be compatible, but this has not been independently verified. If you try it on an H2S or H2C, let me know how it goes in the comments.

Parts

• H2 Series Waste Bin (printed — 1 piece)

Hardware Required

• Up to 4x 10mm diameter magnets (glue into recesses on the back of the bin)

Assembly Notes

Glue up to four 10mm magnets into the recesses on the back of the bin. The bin then attaches magnetically to the back panel of the H2D. Remove and empty as needed.

Print Settings

• Recommended material: PETG or PLA
• Nozzle: 0.4mm
• Layer height: 0.2mm
• Line width: 0.4mm
• Wall count: 4 (1.6mm)
• Infill: 40% Cubic
• Support: No
• Brim: No

Related H2 Series Designs

H2 Series Exhaust Header https://thangs.com/designer/logicalplanet

Related Links

Join the LogicalPlanet Discord https://linktr.ee/logicalplanet

Visit my blog for more details and other designs https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I'll document the changes here. Check back periodically for the latest revision notes or if you're experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.