Because the dog does not forget - but you might. BeltPod is a compact, single-piece flexible bag holder that clips directly onto your belt so abag is always there when you need it. Discrete, secure, and always on you

• even on those walks where you forgot your jacket, your bags, or just your brain.

A small viewing window lets you confirm at a glance that a bag is loaded and ready. Need to carry more bags? Use multiple BeltPods on the same belt - one per bag.

WHAT IS INCLUDED

This listing includes the BeltPod 40 which fits belts up to 1.5 inches (40mm) wide.

Also available separately in this series:

CollarPod 26 - fits 1 inch (26mm) dog collar bands CollarPod 40 - fits 1.5 inch (40mm) dog collar bands

HOW IT WORKS

01 - Clip the BeltPod onto your belt by flexing the back over the edge of the band. The TPU flexibility makes installation easy without removing your belt.

02 - Fold a standard poop bag tightly - lengthwise 4 times, then once across. Keep air out to get the most compact fold possible.

03 - Close the lid and press until the side tabs click into the slots. BeltPod is designed to be firm to open so it does not accidentally pop open during normal activity. This is intentional - your bag needs to be there when you need it.

04 - Check the viewing window before each walk. Green bag visible means you are ready to go.

To open when needed - squeeze both sides firmly and the lid will pop open.

DESIGN NOTES

Single piece print - no assembly, no loose parts, nothing to lose Printed in TPU for flexibility and durability Viewing window confirms bag is present without opening Secure clip design stays planted on your belt Fits standard 1.5 inch belts including nylon, leather, and webbing Designed and field tested in Vancouver, BC

PRINT SETTINGS

Material - TPU 95A or similar (Bambu TPU for AMS works well) Nozzle - 0.4mm Layer Height - 0.2mm Line Width - 0.4mm Walls - 4 (1.6mm) Top/Bottom - 5 (1.0mm) Detect Thin Walls - On Wall Generator - Arachne Infill - 40% Cubic Brim/Raft - No Support - None required Print Orientation - As per included STL/3MF files

Print on a single direct-feed spool setup for best TPU results.

COMPATIBILITY

BeltPod 40 fits belts and straps up to 1.5 inches (40mm) wide including most standard trouser belts, outdoor webbing belts, and work belts.

Measure your belt width before printing. If you are between sizes or have a wider belt, check back for future variants.

Related Links

CollarPod 40 https://than.gs/m/1545368

CollarPod26 https://than.gs/m/1545367

Join the LogicalPlanet Discord https://linktr.ee/logicalplanet

Visit my blog for more details and other designs https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I will document the changes here. Check back periodically for the latest revision notes or if you are experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.