Paul B

Folding Door Wedge (Door Stop)

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 1 of 7
Folding Door Wedge (Door Stop) 3d model
logicalplanet
logicalplanet
|
Image 1 of 7
Folding Door Wedge (Door Stop) 3d model
2D
3D
Makes
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
Folding Door Wedge (Door Stop) 3d model
This model is restricted by licensing terms. 

This is a handy and innovative fold-flat door stop that I can keep in your pocket, drawer, tool kit or just about anywhere.

This print-in-place folding wedge operates in two ways allowing it to accommodate an under-door gap from 8mm to 60mm. It is thin, light and strong making it ideal for any handyman or tradesperson who needs a door wedge with them.

It is a print-in-place design that requires nothing after printing. Simply take it off the build plate and put it to use. Simply fold the two sides together (they are limited to 100-degree angle) and stand it up under a door. Pull the door onto it and the door is stopped.

I used a 15-degree angle for the stop which creates a fairly low rise making it easy to wedge under doors. But that slow rise means one side does not cover a very large range - only 8mm to 35mm. So I made it two-sided allowing the second side to carry on with an additional range for holding more doors - 33mm to 60mm.

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Print Settings:

Material = I recommend PETG but any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Top and Bottom Layer Count = 5 Infill = 100%, minimum 40% Cubic Ironing = Not required Brim = No Support = No

See my blog for more details and other product info… https://www.logicalplanet.com/


20 Likes38 DownloadsSeptember 6, 2024


20 Likes38 DownloadsSeptember 6, 2024
This model is restricted by licensing terms.