This is a 2-litre poop bin for my X1 and P1S exhaust systems that currently have a 0.7-litre poop bin. It is reverse-compatible with the following exhaust systems:

X1 Exhaust System 2.0 https://than.gs/m/1135857

P1S Exhaust System https://than.gs/m/1125125

Like the prior version, you can press in 4 10mm magnets to hold it in place.

No support is required.

Print Settings:

Material = I recommend PETG but any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Top and Bottom Layer Count = 5 Infill = 40% Cubic Ironing = Not required Brim = No Support = No

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.

See my blog for more details and other product info… https://www.logicalplanet.com/