This is an alternative ClampDock mount which allows you to attach ClampDock Accessories to the top edge or underside edge of a panel (compared to the original horizontal edge model). It is adjustable to varying thicknesses of materials and can host the full array of ClampDock Accessories. The clamping mechanism allows you to quickly attach and remove the device and adapt it to various installations.

The ClampDock is 100% printed and snaps together; no hardware, fasteners or adhesives are required.

This download contains the ClampDock host files only. You must download the snap-on ClampDock Accessories separately.

Print Settings

For the best results, I suggest the following: Material = PLA / PETG, use TPU95A for the grips. Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Brim = Should not be needed Support = No, the necessary support is incorporated into the design Print orientation = As per the STL/3MF files.

Related Links

The collection of ClampDock compatible accessories is available here… https://thangs.com/mythangs/collections/132194

The original ClampDock mount is available here… https://than.gs/m/1256833

The ClampDock Vertical mount is available here... https://than.gs/m/1267912

Visit my blog for more details and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.