This is a star shaped Christmas Tree topper with an iconic design. It's a simple 6 part print that can be push-pressed to assemble however superglue is recommended. The base and main part of the star are hollowed out so you can add your own lighting!
Printing Info: The below settings are what were used for a sellable model. Feel free to use settings that work best for your 3D printer. Printer type: FDM Scaling: Can be scaled up or down, smaller scale may present issues with warping Supports: Main star part requires supports; printing the main star leaning back at a 40 degree angle reduces amount of supports needed and prints cleaner. Eyes print best with an outer brim. Infill/Perimeters: 10% infill + 2 perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: Main star part requires supports; printing the main star leaning back at a 40 degree angle reduces amount of supports needed and prints cleaner. Eyes print best with an outer brim.
Assembly: Parts can be be push-pressed to assemble however superglue is recommended. Lid threads onto the container.
File List (5): star treetopper base (STL) star treetopper eye white (STL) star treetopper eyes main (STL) star treetopper full (STL) star treetopper main part (STL)