Tis the Die Hard season so here is my favourite shot taken from Die Hard layered out in HueForge. Here are my settings used for layer swaps to make the screenshot in the image:
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.36mm
Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Brown Transmission Distance: 1.5 PLA+ Esun Orange Transmission Distance: 5 PLA+ Sunlu Skin Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5
Swap Instructions: Start with Black At layer #3 (0.6mm) swap to Brown At layer #5 (0.84mm) swap to Orange At layer #8 (1.2mm) swap to Skin At layer #13 (1.8mm) swap to White for the rest.
Please Note: If you are using a different brand and colour you will want to check the TD to ensure you get the results you want.
HueForge - Die Hard Bruce Willis © 2023 by Keuros Designs is licensed under Attribution-NonCommercial-NoDerivatives 4.0 International