AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Kamil Z

MeanWell RSP-320-24 7015 fan top cover

by
kamilzierke
Follow
Follow
Remix Model
Social
kamilzierke
kamilzierke
|
Image 6 of 9
MeanWell RSP-320-24 7015 fan top cover 3d model
kamilzierke
kamilzierke
|
Image 6 of 9
MeanWell RSP-320-24 7015 fan top cover 3d model
2D
3D
Makes
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover 3d model
MeanWell RSP-320-24 7015 fan top cover - I've just finished printing this case. Initially I didn't plan to do this but I didn't realize that the other part (top cover) relied on this part. The documentation seems to be incorrect. An 80x80x15 mm³ fan seems to be too large to fit the print and indeed the pictures from the orginal creator reveal that the used fan type is named 7015. So I assume 8015 was a typo in the other post by the creator and I assume a 70x70x15 12V fan is to be used here. I guess I will have to return the 80mm fan that I just ordered for this *sigh*. During printing I was constantly battling with underextrusion but after a while I figured our that this was related to the Sunlu S2 filement dryer and the way I loaded the spool which caused to much friction and too much filament tension and thus the feed rate for the extruder wasn't fast enough to keep up. Printed with orange (KeePang) PETG on my Neptune 3 Pro. 5 walls (perimeters) and 0.3mm layer height as recommended. Otherwise mostly default profile from PrusaSlicer for the Neptune 3 Pro. Sadly one corner warped a little. PS: Wow the photo selector of Thangs is really really bad. No meaningful cropping or aspect ratios are supported. - 3d model

MeanWell RSP-320-24 top cover accommodating 7015 12V fan, making it absolutely quiet.

There are 4 positioning pins for the fan (blowing air into the chasis), and 2 of them are hollow to screw the fan in.

Mine printed with 0.4 nozzle Layer hight: 0.3mm Line width: 0.44mm Wall line count: 5

Categories:

Functional
Other
,
3d Printers
Other
4 Likes10 DownloadsMay 1, 2023
4 Likes10 DownloadsMay 1, 2023
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy