This model is restricted by licensing terms.
View license.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Green Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments
Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Green At layer #15 (1.28mm) swap to White for the rest.
0 Likes0 DownloadsJuly 6, 2024
0 Likes0 DownloadsJuly 6, 2024
This model is restricted by licensing terms.
View license.